:Fast Moving

Revision as of 20:24, 15 September 2017 by Nathan (talk | contribs) (Prerequisites)

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

Face Detect

Description

Face detection is to detect if there is any human face appearing in the video, and capture the face then send it to the NVR for analysis and processing, it can activate snapshot, record and alarm.

FaceDetect.png

Internet Explorer Setup

Prerequisites

  • Intelligent Network Camera.
  • Updated firmware that supports intelligent features.
  • Internet Explorer.

IVS Best Practices

To assess issues with IVS compatibility between the camera and NVR, please update both devices to the most current firmware and factory reset the NVR, and use the hard reset button to reset the camera.

Video Instructions

Step by Step Instructions

1. Click “Enable”.

Face Detect1.png

2. Click face enhancement to enhance the face image display.

Face Detect2.png

3. Select max and min size, draw max and min target for target filtering. This step is to filter target, which can’t be operated under default status.

Face Detect3.png

4. Activate record, alarm, email and snapshot according to the requirements.

Face Detect4.png

5. Target filter can set max target and min target, which means it can detect max and min target.

Face Detect5.png

6. Click ok to complete settings.

Face Detect6.png

System Interface Setup

Prerequisites

Step by Step Instructions

SmartPSS Setup

Prerequisites

Step by Step Instructions