Difference between revisions of "SmartPSS/Playback"

(Step by Step Instructions)
(Description)
Line 29: Line 29:
  
 
===Description===
 
===Description===
 +
How to playback recordings on SmartPSS 2.0
  
How to playback recordings on SmartPSS 2.0
+
===Prerequisites===
 +
* SmartPSS 2.0
 +
* Device Access
  
 
===Video Instructions===
 
===Video Instructions===

Revision as of 17:10, 1 May 2017

Playback from SmartPSS

Description

Playback in SmartPSS is a feature that access local or remote storage devices such as an NVR. Follow the instructions below to start using this feature of SmartPSS.

Prerequisites

Video Instructions

Step by Step Instructions

Step 1. From the home page select "Play Back"

Smart play 1.png


Step 2. On the right hand side, select a device to view play back. Multiple devices may be selected

Smart play 2.png


Step 3. Select Record or Picture → Select type for drop down selection. You may select all or any type of the events such as motion → Select Stream Type → Select from date and time to date and time → Select Search.

Smart play 3.png


Step 4. Select Record or Event to view Playback → Select Channels to view → select play.

Smart play 4.png

SmartPSS 2.0 Playback

Description

How to playback recordings on SmartPSS 2.0

Prerequisites

  • SmartPSS 2.0
  • Device Access

Video Instructions

Step by Step Instructions

1. From the home menu select "Playback".

Smatpss2playback1.png

2. From the left hand side select device -> camera or cameras. More than one maybe selected.

Smatpss2playback2.png

3. Select Record type. Drop down menu allows to select All Records, General, Alarm, MD (Motion Detection), and Intelligent Analysis.

Smatpss2playback3.png

4. Select Stream Type (Main Stream or Sub Stream).

Smatpss2playback4.png

5. Select Date and time -> Select OK -> Select Search.

Smatpss2playback5.png

6. Click on the Play button.

Smatpss2playback6.png

Smatpss2playback7.png


Related Articles in Category:SmartPSS
<DynamicPageList>

category = SmartPSS count=5 </DynamicPageList>

<DynamicPageList> category = SmartPSS offset = 5 count= 5 </DynamicPageList>

<DynamicPageList>

category = SmartPSS offset = 10 count=5 </DynamicPageList>