Video Intercom/How To Add A Second VTH1550CH To A VTO1210C-X

These instructions are for Generation 1, IP-based Video Intercom Devices only.
Icon Name Generation Technology SIP 2.0 Example Device 1 Example Device 2 Identifying Characteristic PC Software Mobile App
Gen1-IP Gen 1 IP Non-SIP VTH1550CH VTO2111D-WP No "-2" or "-S" SmartPSS gDMSS or iDMSS

How To Add A Second VTH1550CH To A VTO1210C-X

Description

This Step by Step guide will provide instruction to setup A Second VTH1550CH To A VTH5221D via a LAN connection.

  • VTH status indicator key:

VTO2VTH5Setup070.png

Prerequisites

  • Power to a second VTH1550CH and VTO2111D-WP (PoE or DC12V)
  • Wired network (VTO211D-WP can be wireless)
  • Existing VTO and VTH connection

Video Instructions

Step by Step Instructions

1. Make sure the VTH is on a network connection from VTH to VTO. The VTH and VTO are configured through automatic room number negotiation, the LAN IP set on the VTH does not need to be static. Let's start by selecting Settings.

VTO2VTH1ExtSetup001.jpg

VTO2VTH1ExtSetup002.jpg

2. Now select Project Settings and enter in the password for this model of VTH (002236).

VTO2VTH1ExtSetup008.jpg

3. Now select Product Info on the right hand side, then select Master to make sure you are set on Extension mode.


VTO2VTH1ExtSetup011.jpg

4. The room number of the Main VTH that had been configured previously needs to be entered, as well as a "-" with the extension number you desire afterwards.

VTO2VTH1ExtSetup012.jpg

5. Now enter the IP address of the Main VTH. Then select OK

VTO2VTH1ExtSetup014.jpg

VTO2VTH1ExtSetup016.jpg

6. Now select Search Device, then refresh to scan the network, then select the VTO device's IP, then select Add.

VTO2VTH1ExtSetup020.jpg

7. Now make sure the login information is correct for your VTO device.

VTO2VTH1ExtSetup022.jpg

VTO2VTH1ExtSetup024.jpg

VTO2VTH1ExtSetup025.jpg


8. Select Network on the right, then make sure the Main_VTO's address matches, and then select enable status, then select OK.

VTO2VTH1ExtSetup028.jpg

VTO2VTH1ExtSetup029.jpg

9. Once the VTO offline icon (see key for description) goes away, this will be an indication that the automatic room number service has initialized. However, you might not be able to call for a few minutes while the settings initialize. If calling through the VTO doesn't work at this point, please restart both the VTH and the VTO.

VTO2VTH1ExtSetup037.jpg

10. Attempt to make a call, and enjoy!

VTO2VTH1ExtSetup038.jpg