People Flow Control/Enable and Use Flow Control

Enable and Use People Flow Control

Description

People Flow Control allows for Live display of People Flow Control statistics on a monitor attached directly to the NVR.

These instructions will show:

• How to enable Flow Mode
• How to set Flow Mode to a Spot monitor
• How to clear on screen statistics

Prerequisites

• People Flow Control setup instructions followed
• Local monitor attached to NVR

Video Instructions

Enable and Use Flow Control: SystemUI

Step by Step Instructions

Enable Flow Mode

1. From Live View

Right click select Flow Mode

2. The NVR will display a full screen of statistics for People Flow Control

The statistical information includes: Total number of people have entered the area, total number of people have left the area, total number of people staying in the area, total number of people allowed to enter the area, and hints.

These values will displays the statistical sum of all bound cameras and rules.

Flow Mode interface explanation:

1. Enter - the number of people who have entered the area

2. Exit - the number of people who have exited the area

3. Stay - the number of people staying in the area. Stay = (Enter #) - (Exit #). When Stay < 0, it will display as 0.

4. Available - the number of available people. Available = (Threshold value) - (Stay value). When Available < 0, it will display as 0.

5. Traffic light:

Color of light	Values of People Flow Count	Message displayed	Color of Available & Stay values	Example image
Red	Stay greater than Threshold value Available is 0	Please wait for the green light	Red
Yellow	Stay greater than Warning Value Stay less than Threshold value	Please enter one by one	Yellow
Green	Stay less than Warning Value	Please enter one by one	Blue

Exit Flow Mode

People flow panels can only be closed by clicking the close button at the top-right corner.

Set Flow Mode on Spot Monitor

The Flow Mode can be set to a connected monitor on the spot output of the NVR's VGA/HDMI ports

Under Display > Sub Screen

Toggle the switch next to Flow Control to enable VGA/HDMI SPOT output for the Flow Control UI

Examples of Triggered Events

Enter Event triggered:

Counter updated live at Monitor

Exit event triggered