Difference between revisions of "NVR/Recording Setup/Motion Record Troubleshoot"

(Created page with "==Motion Recording Troubleshoot== Some settings will cause motion detection not detected When you have some issue with motion detection, please check these settings. #check i...")
 
 
(6 intermediate revisions by 2 users not shown)
Line 3: Line 3:
  
 
When you have some issue with motion detection, please check these settings.
 
When you have some issue with motion detection, please check these settings.
#check if you have enabled the motion recording:
+
 
 +
1. Check if you have enabled the motion recording:
 +
 
 
[[file:NVRiSettingStorageScheduleRecord.png]]
 
[[file:NVRiSettingStorageScheduleRecord.png]]
#check if you have enable the motion detection and record channel:
+
 
 +
2. Check if you have enable the motion detection and record channel:
 +
 
 
[[file:NVRiSettingEventVideoDetectMotionDetect.png]]
 
[[file:NVRiSettingEventVideoDetectMotionDetect.png]]
#please check if detection time is right:
+
 
[[file:DetectionTime]]
+
3. Please check if detection time is right:
#please check if the sensitivity and threshold are set correctly:
+
 
[[file:SensitivityandThreshold.jpg]]
+
[[file:DetectionTime.jpg|668px]]
 +
 
 +
4. Please check if the sensitivity and threshold are set correctly:
 +
 
 +
[[file:SensitivityandThreshold.jpg|668px]]
 +
 
 +
5. Ensure Record is enabled:
 +
 
 +
[[file:NVRiSettingStorageRecord.png]]
 +
 
 +
 
 +
 
 +
 
 +
 
 +
 
 +
[[Category:NVR Interface]]
 +
[[Category:Record]]
 +
[[Category:Motion_Detection]]

Latest revision as of 20:01, 15 August 2019

Motion Recording Troubleshoot

Some settings will cause motion detection not detected

When you have some issue with motion detection, please check these settings.

1. Check if you have enabled the motion recording:

NVRiSettingStorageScheduleRecord.png

2. Check if you have enable the motion detection and record channel:

NVRiSettingEventVideoDetectMotionDetect.png

3. Please check if detection time is right:

DetectionTime.jpg

4. Please check if the sensitivity and threshold are set correctly:

SensitivityandThreshold.jpg

5. Ensure Record is enabled:

NVRiSettingStorageRecord.png