Difference between revisions of "Troubleshoot/NVR/HDMI Troubleshoot"

 
(5 intermediate revisions by 2 users not shown)
Line 1: Line 1:
 
===There is no HDMI output.===
 
===There is no HDMI output.===
* Display is not set in HDMI mode.
+
* If Display is not set in HDMI mode then set to HDMI.
* The HDMI connection is not fully set in the connection.
+
* If The HDMI connection is not fully set in the connection then configure and reconnect HDMI.
* The HDMI connector maybe damaged.
+
* If The HDMI connector is damaged then change the HDMI Cable.
 +
* If HDMI Cable is damaged then change HDMI Cable.  
 +
* If Check if monitor is on the correct source setting then set to the correct source.
 +
* If DVR / NVR is set to a resolution that is unsupported by monitor then reset resolution.
 +
 
 
[[File:300px-HDMI_Logo.svg.png|right]]
 
[[File:300px-HDMI_Logo.svg.png|right]]
 +
 +
 +
 +
 +
 +
 +
[[Category:Troubleshoot]]

Latest revision as of 04:16, 17 August 2016

There is no HDMI output.

  • If Display is not set in HDMI mode then set to HDMI.
  • If The HDMI connection is not fully set in the connection then configure and reconnect HDMI.
  • If The HDMI connector is damaged then change the HDMI Cable.
  • If HDMI Cable is damaged then change HDMI Cable.
  • If Check if monitor is on the correct source setting then set to the correct source.
  • If DVR / NVR is set to a resolution that is unsupported by monitor then reset resolution.
300px-HDMI Logo.svg.png