Notice: Firmware Links Under Maintenance We are currently undergoing maintenance on all firmware links. If any links are inaccessible, please email or contact Tech Support for the firmware. We appreciate your patience during the maintenance, thank you for your understanding.
Difference between revisions of "NVR/Recording Setup/Zero Channel"
(Created page with "==Setup Zero Channel== (Placeholder)") |
|||
| (21 intermediate revisions by 4 users not shown) | |||
| Line 1: | Line 1: | ||
==Setup Zero Channel== | ==Setup Zero Channel== | ||
| − | + | '''How to setup Zero Channel on Dahua NVR''' | |
| + | |||
| + | |||
| + | Step 1: Please log into the DVR/NVR interface. | ||
| + | [[file:NVRLogin.jpg]] | ||
| + | |||
| + | Step 2: Navigate to the System Menu | ||
| + | [[file:NVRInterface.jpg]] | ||
| + | |||
| + | Step 3: Then go to the "Display" option | ||
| + | [[file:NVRSystem.jpg]] | ||
| + | |||
| + | Step 4: Please look at the tabs at the top of the page and select "Zero Channel" | ||
| + | |||
| + | |||
| + | Step 5: You will be presented with some options to configure certain aspects of the | ||
| + | |||
| + | Zero Channel stream such as Compression, Resolution, Frame Rate & Bit Rate | ||
| + | |||
| + | |||
| + | Please see the video below on Zero Channel configuration: | ||
| + | |||
| + | |||
| + | [[File:Zero_Channel.gif|none]] | ||
| + | |||
| + | |||
| + | |||
| + | |||
| + | '''How to setup Zero Channel on Dahua Web Service''' | ||
| + | |||
| + | |||
| + | '''Step 1:''' Setup Tab → System → Display. | ||
| + | [[File:Zero_channel_1.png|1000px]] | ||
| + | |||
| + | |||
| + | '''Step 2:''' Zero-Channel → Check "Enable" → Click "Save". | ||
| + | [[File:Zero_channel_2.png|1000px]] | ||
| + | |||
| + | |||
| + | |||
| + | |||
| + | [[Category:Troubleshoot]] | ||
| + | |||
| + | [[Category:NVR]] | ||
| + | |||
| + | [[Category:Browser]] | ||
| + | |||
| + | [[Category:NVR Interface]] | ||
Latest revision as of 23:07, 2 November 2020
Setup Zero Channel
How to setup Zero Channel on Dahua NVR
Step 1: Please log into the DVR/NVR interface.
Step 2: Navigate to the System Menu
Step 3: Then go to the "Display" option
Step 4: Please look at the tabs at the top of the page and select "Zero Channel"
Step 5: You will be presented with some options to configure certain aspects of the
Zero Channel stream such as Compression, Resolution, Frame Rate & Bit Rate
Please see the video below on Zero Channel configuration:
How to setup Zero Channel on Dahua Web Service
Step 1: Setup Tab → System → Display.
Step 2: Zero-Channel → Check "Enable" → Click "Save".
