Difference between revisions of "IVS2.0:SmartPSS1.16/PTZ IVS Auto Tracking"

(Step by Step Instructions)
(Step by Step Instructions)
 
(3 intermediate revisions by the same user not shown)
Line 1: Line 1:
 
=How to Setup Auto-Tracking in SmartPSS=
 
=How to Setup Auto-Tracking in SmartPSS=
 
==Description==
 
==Description==
 +
This article will show you how to setup PTZ Auto-Tracking in SmartPSS 2.0
 +
 
==Prerequisites==
 
==Prerequisites==
 
*Dahua PTZ with Auto-Tracking
 
*Dahua PTZ with Auto-Tracking
Line 6: Line 8:
 
*Dahua PTZ with Auto-Tracking added to SmartPSS
 
*Dahua PTZ with Auto-Tracking added to SmartPSS
 
==Video Instructions==
 
==Video Instructions==
<embedvideo service="youtube">https://www.youtube.com/watch?v=EXAMPLE</embedvideo>
+
<embedvideo service="youtube">https://youtu.be/HA9X1YK9yp8</embedvideo>
 +
 
 
==Step by Step Instructions==
 
==Step by Step Instructions==
 
1. Launch SmartPSS, and click, "Live View"
 
1. Launch SmartPSS, and click, "Live View"
[[File:YourProcess1.jpg|800x800px]]
+
 
 +
[[File:Auto_Track_SmartPSS-2_1.png|800x800px]]
  
 
2. Locate the Dahua PTZ in the device tree, right click on the device, and click, "IVS Channel Cfg"
 
2. Locate the Dahua PTZ in the device tree, right click on the device, and click, "IVS Channel Cfg"
 +
 +
[[File:Auto_Track_SmartPSS-2_2.png|800x800px]]
  
 
3. A window will pop up, from here you can move the PTZ around, and establish Pre-Sets. IVS rules are all based on established Pre-Sets first. Once you have the PTZ in the desired position click, "Add Scene"
 
3. A window will pop up, from here you can move the PTZ around, and establish Pre-Sets. IVS rules are all based on established Pre-Sets first. Once you have the PTZ in the desired position click, "Add Scene"
 +
 +
[[File:Auto_Track_SmartPSS-2_3.png|800x800px]]
  
 
4. Click, "Next" to proceed to the next step.
 
4. Click, "Next" to proceed to the next step.
 +
 +
[[File:Auto_Track_SmartPSS-2_4.png|800x800px]]
  
 
5. Select one of the IVS options. For these instructions we will select the first icon for, "IVS"
 
5. Select one of the IVS options. For these instructions we will select the first icon for, "IVS"
 +
 +
[[File:Auto_Track_SmartPSS-2_5.png|800x800px]]
  
 
6. Click, "Next" to proceed to the next step.
 
6. Click, "Next" to proceed to the next step.
 +
 +
[[File:Auto_Track_SmartPSS-2_6.png|800x800px]]
  
 
7. On this page you can configure the Detection zone for this IVS rule. Click, "Detection Zone"
 
7. On this page you can configure the Detection zone for this IVS rule. Click, "Detection Zone"
 +
 +
[[File:Auto_Track_SmartPSS-2_7.png|800x800px]]
  
 
8. Draw a rectangle around the region you wish to establish as the Detection Zone. Add a new line with Left-Click, and complete drawing the region with Right-Click.  
 
8. Draw a rectangle around the region you wish to establish as the Detection Zone. Add a new line with Left-Click, and complete drawing the region with Right-Click.  
 +
 +
[[File:Auto_Track_SmartPSS-2_8.png|800x800px]]
  
 
9. Click, "Apply" to save the Detection Region.  
 
9. Click, "Apply" to save the Detection Region.  
 +
 +
[[File:Auto_Track_SmartPSS-2_9.png|800x800px]]
  
 
10. Next click, "Rule Config"
 
10. Next click, "Rule Config"
 +
 +
[[File:Auto_Track_SmartPSS-2_10.png|800x800px]]
  
 
11. Click, "Add Rule"
 
11. Click, "Add Rule"
 +
 +
[[File:Auto_Track_SmartPSS-2_11.png|800x800px]]
  
 
12. Select the IVS rule you wish to establish.
 
12. Select the IVS rule you wish to establish.
 +
 +
[[File:Auto_Track_SmartPSS-2_12.png|800x800px]]
  
 
13. Draw a rectangle around the region you wish to establish as the zone for the IVS rule. Add a new line with Left-Click, and complete drawing the region with Right-Click.  
 
13. Draw a rectangle around the region you wish to establish as the zone for the IVS rule. Add a new line with Left-Click, and complete drawing the region with Right-Click.  
 +
 +
[[File:Auto_Track_SmartPSS-2_13.png|800x800px]]
  
 
14 Click, "Apply" then, "Save"
 
14 Click, "Apply" then, "Save"
 +
 +
[[File:Auto_Track_SmartPSS-2_14.png|800x800px]]

Latest revision as of 23:41, 26 March 2019

How to Setup Auto-Tracking in SmartPSS

Description

This article will show you how to setup PTZ Auto-Tracking in SmartPSS 2.0

Prerequisites

  • Dahua PTZ with Auto-Tracking
  • SmartPSS
  • Dahua PTZ with Auto-Tracking added to SmartPSS

Video Instructions

Step by Step Instructions

1. Launch SmartPSS, and click, "Live View"

Auto Track SmartPSS-2 1.png

2. Locate the Dahua PTZ in the device tree, right click on the device, and click, "IVS Channel Cfg"

Auto Track SmartPSS-2 2.png

3. A window will pop up, from here you can move the PTZ around, and establish Pre-Sets. IVS rules are all based on established Pre-Sets first. Once you have the PTZ in the desired position click, "Add Scene"

Auto Track SmartPSS-2 3.png

4. Click, "Next" to proceed to the next step.

Auto Track SmartPSS-2 4.png

5. Select one of the IVS options. For these instructions we will select the first icon for, "IVS"

Auto Track SmartPSS-2 5.png

6. Click, "Next" to proceed to the next step.

Auto Track SmartPSS-2 6.png

7. On this page you can configure the Detection zone for this IVS rule. Click, "Detection Zone"

Auto Track SmartPSS-2 7.png

8. Draw a rectangle around the region you wish to establish as the Detection Zone. Add a new line with Left-Click, and complete drawing the region with Right-Click.

Auto Track SmartPSS-2 8.png

9. Click, "Apply" to save the Detection Region.

Auto Track SmartPSS-2 9.png

10. Next click, "Rule Config"

Auto Track SmartPSS-2 10.png

11. Click, "Add Rule"

Auto Track SmartPSS-2 11.png

12. Select the IVS rule you wish to establish.

Auto Track SmartPSS-2 12.png

13. Draw a rectangle around the region you wish to establish as the zone for the IVS rule. Add a new line with Left-Click, and complete drawing the region with Right-Click.

Auto Track SmartPSS-2 13.png

14 Click, "Apply" then, "Save"

Auto Track SmartPSS-2 14.png