Difference between revisions of "Template:RS485 WebUI New"

(Created page with " ==Prerequisites== ==Video Instructions== <embedvideo service="youtube">https://www.youtube.com/XXX</embedvideo> ==Step by Step Instructions==")
 
 
(One intermediate revision by one other user not shown)
Line 1: Line 1:
  
 
==Prerequisites==
 
==Prerequisites==
 +
* Dahua recorder with RS485 port
 +
* Network connection for recorder
 
==Video Instructions==
 
==Video Instructions==
<embedvideo service="youtube">https://www.youtube.com/XXX</embedvideo>
+
<embedvideo service="youtube">https://youtu.be/K-Rs42of2s0</embedvideo>
 
==Step by Step Instructions==
 
==Step by Step Instructions==
 +
1. Enter the IP of the device into a browser
 +
 +
At the Web Login
 +
 +
Enter the Username and Password
 +
 +
Click Login
 +
 +
[[File:RS485_-_WebUI_New_-_1.jpg|600px]]
 +
 +
2. Click Management in the top left corner of the screen
 +
 +
Select Camera
 +
 +
[[File:RS485_-_WebUI_New_-_2.jpg|600px]]
 +
 +
3. Click PTZ
 +
 +
[[File:RS485_-_WebUI_New_-_3.jpg|600px]]
 +
 +
4. Use the dropdown box to select the Channel
 +
 +
[[File:RS485_-_WebUI_New_-_4.jpg|600px]]
 +
 +
5. Use the dropdown box next to PTZ Type to select Local
 +
 +
[[File:RS485_-_WebUI_New_-_5.jpg|600px]]
 +
 +
6. Enter the desired settings for the RS485 communication
 +
 +
* Protocol
 +
* Address
 +
* Baud Rate
 +
* Data Bit
 +
* Stop Bit
 +
* Parity
 +
 +
[[File:RS485_-_WebUI_New_-_6.jpg|600px]]
 +
 +
7. Click OK to save settings
 +
 +
[[File:RS485_-_WebUI_New_-_7.jpg|600px]]

Latest revision as of 19:59, 24 January 2020

Prerequisites

  • Dahua recorder with RS485 port
  • Network connection for recorder

Video Instructions

Step by Step Instructions

1. Enter the IP of the device into a browser

At the Web Login

Enter the Username and Password

Click Login

RS485 - WebUI New - 1.jpg

2. Click Management in the top left corner of the screen

Select Camera

RS485 - WebUI New - 2.jpg

3. Click PTZ

RS485 - WebUI New - 3.jpg

4. Use the dropdown box to select the Channel

RS485 - WebUI New - 4.jpg

5. Use the dropdown box next to PTZ Type to select Local

RS485 - WebUI New - 5.jpg

6. Enter the desired settings for the RS485 communication

  • Protocol
  • Address
  • Baud Rate
  • Data Bit
  • Stop Bit
  • Parity

RS485 - WebUI New - 6.jpg

7. Click OK to save settings

RS485 - WebUI New - 7.jpg