Difference between revisions of "Accessories/Keyboard/DH-NKB1000/Firmware Update"

(→‎Step by Step Instructions)
 
(5 intermediate revisions by 3 users not shown)
Line 5: Line 5:
  
 
==Prerequisites==
 
==Prerequisites==
−
* Dahua Config tool. Version 5.000.0000000.0
+
* Dahua ConfigTool. Version 5.0 or higher
 
https://dahuawiki.com/ConfigTool
 
https://dahuawiki.com/ConfigTool
−
*Current Firmware General_NKB1000_Eng_V2.620.0000000.1.R.20200221: {{Template:General_NKB1000}}  
+
*Current NKB1000 Firmware:
−
 
+
{{Template:General_NKB1000}}  
−
*NKB1000 User Name-Default=admin
 
−
*NKB1000 Password-Default=888888
 
  
 
==Step by Step Instructions==
 
==Step by Step Instructions==
−
1. After downloading both the firmware for NKB1000 and Latest Config tool, install the Dahua config tool to your local machine.
+
1. After downloading both the firmware for NKB1000 and the latest ConfigTool, install the Dahua ConfigTool to your local machine.
  
−
2. Connect the NKB to same LAN as your computer via Ethernet cable.
+
2. Connect the NKB to the same LAN as your computer via Ethernet cable.
  
 
3. Connect the power cable to the NKB.  Wait for the device to power up fully.
 
3. Connect the power cable to the NKB.  Wait for the device to power up fully.
Line 21: Line 19:
 
4. By default, the NKB is set to DHCP.   
 
4. By default, the NKB is set to DHCP.   
  
−
You can check this on the controller itself by pressing Enter-Select PW with joystick down-hit default password 888888-Enter-then select Menu Settings-Enter-System-Enter-Network-Enter
+
5. Open ConfigTool and click on '''Search Setting''' at the top
−
 
 
−
5. Open Dahua Config Tool and click on the Search Setting on top :
 
−
 
 
−
[[File:NKB1000 Firmware Upgrade 1.jpg|700px]]
 
  
−
6. Under password, enter 888888 and press OK (Default password)
+
[[file:NKB1000ConfigToolFirmwareUpgrade1.png|800px]]
  
−
[[File:NKB1000 Firmware Upgrade 2.jpg|700px]]
+
6. Enter "admin" in the '''Username''' field and the NKB1000's password in the '''Password''' field. (By deafult the password of the NKB is "888888".)
 +
<br>Then click on '''OK'''
  
−
7. Click to open file path to located the firmware here:
+
[[file:NKB1000ConfigToolFirmwareUpgrade2.png|800px]]
  
−
[[File:NKB1000 Firmware Upgrade 3.jpg|700px]]
+
7. Click on the Down Arrow at the top right.
 +
<br>Then click on '''Setting''' from the drop-down
  
−
8. Browse to NKB1000 FW that was just downloaded, select and click open. 
+
[[file:NKB1000ConfigToolFirmwareUpgrade3.png|800px]]
  
−
[[File:NKB1000 Firmware Upgrade 4.jpg|700px]]
+
8. Enable '''Compatability Mode'''
  
−
9. Hit the update (Operate) button and wait for full install.
+
[[file:NKB1000ConfigToolFirmwareUpgrade4.png|800px]]
  
−
[[File:NKB1000 Firmware Upgrade 5.jpg|700px]]
+
9. Click on '''OK'''
  
−
10. The FW update is complete when you see a Green check mark on the Config tool interface and the time and date on the NKB Display.
+
[[file:NKB1000ConfigToolFirmwareUpgrade5.png|800px]]
  
−
[[File:NKB1000 Firmware Upgrade 6.jpg|700px]]
+
10. Click on '''OK'''
  
−
[[File:NKB1000 Firmware Upgrade 7.jpg|700px]]
+
[[file:NKB1000ConfigToolFirmwareUpgrade6.png|800px]]
  
 +
11. Select '''Device Upgrade''' on the left.
 +
<br>Find the NKB1000 in the list and click the '''Upgrade File Path''' Folder icon next to it
  
 +
[[file:NKB1000ConfigToolFirmwareUpgrade7.png|800px]]
  
−
Old Method
+
12. Browse the computer's file system to find the NKB1000 firmware.
 +
<br>Select the file and click '''Open'''
  
−
==Description==
+
[[file:NKB1000ConfigToolFirmwareUpgrade8.png|800px]]
−
These instructions will show you how to update the firmware on a NKB1000 device.
 
−
 
 
−
==Prerequisites==
 
−
*[https://dahuawiki.com/images/Files/Software/ConfigTool/1.16RECUpgrade.exe REC Upgrade Tool 1.16!]
 
−
*Current Firmware: {{Template:General_NKB1000}}
 
−
*NKB1000 User Name-Default=admin
 
−
*NKB1000 Password-Default=888888
 
−
 
 
−
==Video Instructions==
 
−
<embedvideo service="youtube">https://youtu.be/afPyiVgIDYc</embedvideo>
 
−
 
 
−
==Step by Step Instructions==
 
−
1. After downloading both the firmware for NKB1000 and REC Upgrade Tool, extract the files from the firmware folder into the local computer.<br>
 
−
[[File:1._Firmware_Extraction.PNG|500px]]
 
  
−
2. Input the IP address of the keyboard, and press "Login".<br>
+
13. Click the '''Operate''' Up Arrow icon next to the NKB1000 in the list.
−
[[File:2._Open_REC_Upgrade_Tool_and_Login.PNG|300px]]
+
<br>The upgrade process will start and you will see a progress bar as it installs
−
[[File:3._Type_Username_Password.PNG|300px]]
 
  
−
3. Browse to the extracted firmware file by clicking "Open Files".<br>
+
[[file:NKB1000ConfigToolFirmwareUpgrade9.png|800px]]
−
[[File:4._Browse_the_File_For_Upgrade.PNG|300px]]
 
  
−
4. Click "Bios" to confirm the upgrade.<br>
+
14. When the firmware upgarde is sucessfully completed you will see a Green Check Mark
−
[[File:5._Press_BIOS_to_Confirm_Upgrade.PNG|300px]]
 
  
−
5. When it upgrades successfully, a pop-up notification should be displayed on the screen.<br>
+
[[file:NKB1000ConfigToolFirmwareUpgrade10.png|800px]]
−
[[File:6._Upgrade_Successfully.PNG|300px]]
 

Latest revision as of 21:44, 21 June 2023

NKB1000 Firmware Update Instructions

Description

These instructions will show you how to update the firmware on a NKB1000 device.

Prerequisites

  • Dahua ConfigTool. Version 5.0 or higher

https://dahuawiki.com/ConfigTool

  • Current NKB1000 Firmware:
Build Date: 02-21-2020

Step by Step Instructions

1. After downloading both the firmware for NKB1000 and the latest ConfigTool, install the Dahua ConfigTool to your local machine.

2. Connect the NKB to the same LAN as your computer via Ethernet cable.

3. Connect the power cable to the NKB. Wait for the device to power up fully.

4. By default, the NKB is set to DHCP.

5. Open ConfigTool and click on Search Setting at the top

NKB1000ConfigToolFirmwareUpgrade1.png

6. Enter "admin" in the Username field and the NKB1000's password in the Password field. (By deafult the password of the NKB is "888888".)
Then click on OK

NKB1000ConfigToolFirmwareUpgrade2.png

7. Click on the Down Arrow at the top right.
Then click on Setting from the drop-down

NKB1000ConfigToolFirmwareUpgrade3.png

8. Enable Compatability Mode

NKB1000ConfigToolFirmwareUpgrade4.png

9. Click on OK

NKB1000ConfigToolFirmwareUpgrade5.png

10. Click on OK

NKB1000ConfigToolFirmwareUpgrade6.png

11. Select Device Upgrade on the left.
Find the NKB1000 in the list and click the Upgrade File Path Folder icon next to it

NKB1000ConfigToolFirmwareUpgrade7.png

12. Browse the computer's file system to find the NKB1000 firmware.
Select the file and click Open

NKB1000ConfigToolFirmwareUpgrade8.png

13. Click the Operate Up Arrow icon next to the NKB1000 in the list.
The upgrade process will start and you will see a progress bar as it installs

NKB1000ConfigToolFirmwareUpgrade9.png

14. When the firmware upgarde is sucessfully completed you will see a Green Check Mark

NKB1000ConfigToolFirmwareUpgrade10.png

Retrieved from "https://DahuaWiki.com/index.php?title=Accessories/Keyboard/DH-NKB1000/Firmware_Update&oldid=82278"