Difference between revisions of "Backup/Backup Snapshot"

(Links)
 
(12 intermediate revisions by 3 users not shown)
Line 1: Line 1:
 
==Backup Snapshot via USB==
 
==Backup Snapshot via USB==
 +
===Description===
 +
Backup snapshots on USB allows you to backup the snapshots for later use.
 +
===Prerequisites===
 +
*Flash drive or other backup device.
 +
*NVR/HCVR with HDD
 +
*Camera connected to recorder
 +
===Video Instructions===
 +
<embedvideo service="youtube">https://youtu.be/waBWi-irQGY</embedvideo>
 +
===Step by Step Instructions===
 +
1. In order to get the system to save a snapshot we will setup motion detection. On the NVR go to the MAIN MENU->EVENT->VIDEO DETECT->Motion Detection and Enable motion detection, then the snapshot function, and hit Apply.
  
First of all, please enable the snapshot function. You can check with the following procedure.
+
[[File:usbssbkup000.jpg|500x500px]]
  
# Main Menu->setting->schedule, choose the channel that you want to use the snapshot function, enable the snapshot function, and enable MD function in the right period. Please don’t forget to save it.
+
2. Now we will setup the terms of recording by going to MAIN MENU->STORAGE->SCHEDULE->Snapshot and selecting the gear icon.
# Main Menu->setting->detect, choose the Event Type and the right channel, please enable this detect function and snapshot function with the right channel.
 
# Main Menu->setting->encoding->snapshot, please change the mode to trigger.
 
  
If you have done that, please Enter Main Menu->Backup, then you will see the picture like this:
+
[[File:usbssbkup001.jpg|500x500px]]
  
[[file:SnapshotBackup1.jpg]]
+
Select Motion and copy to All days of the week in order to trigger a snapshot, then select Save.
  
Choose the USB device, then enter Backup. And you will see:
+
[[File:usbssbkup002.jpg|500x500px]]
  
[[file:SnapshotBackup2.jpg]]
+
3. Ensure that you have enabled Snapshot Recording by going to MAIN MENU->STORAGE->RECORD and selecting Enable and then Apply.
  
 +
[[File:usbssbkup003.jpg|500x500px]]
 +
 +
4. Plug in your USB flash drive into the recorder, and select File Backup on the prompt OR go into the MAIN MENU->BACKUP
 +
 +
[[File:usbssbkup004.jpg|500x500px]]
 +
 +
[[File:usbssbkup005.jpg|500x500px]]
 +
 +
5. Under the Type pull-down menu select PIC for pictures
 +
 +
[[File:usbssbkup006.jpg|500x500px]]
 +
 +
[[File:usbssbkup007.jpg|500x500px]]
 +
 +
6. Under Record CH select the channel or all channels that you would like to find a screen shot on.
 +
 +
[[File:usbssbkup008.jpg|500x500px]]
 +
 +
7. Define a time frame within 24 hours that you would like to search for the Snapshots and select Add
 +
 +
[[File:usbssbkup009.jpg|500x500px]]
 +
 +
8. Once a list populates select the Snapshots that you would like to backup and select Start to begin the backup.
 +
 +
[[File:usbssbkup010.jpg|500x500px]]
 +
 +
9. A progress bar at the bottom of the window will give you an estimate of when it will complete. You can cancel this operation by selecting Stop.
 +
 +
[[File:usbssbkup011.jpg|500x500px]]
 +
 +
 +
10. A prompt will appear on the screen once the process has finished, select okay and remove the USB flash drive with your backup.
 +
 +
[[File:usbssbkup012.jpg|500x500px]]
  
 
[[Category:Backup]]
 
[[Category:Backup]]
 
[[Category:Record]]
 
[[Category:Record]]
 
[[Category:NVR]]
 
[[Category:NVR]]

Latest revision as of 20:33, 3 November 2020

Backup Snapshot via USB

Description

Backup snapshots on USB allows you to backup the snapshots for later use.

Prerequisites

  • Flash drive or other backup device.
  • NVR/HCVR with HDD
  • Camera connected to recorder

Video Instructions

Step by Step Instructions

1. In order to get the system to save a snapshot we will setup motion detection. On the NVR go to the MAIN MENU->EVENT->VIDEO DETECT->Motion Detection and Enable motion detection, then the snapshot function, and hit Apply.

Usbssbkup000.jpg

2. Now we will setup the terms of recording by going to MAIN MENU->STORAGE->SCHEDULE->Snapshot and selecting the gear icon.

Usbssbkup001.jpg

Select Motion and copy to All days of the week in order to trigger a snapshot, then select Save.

Usbssbkup002.jpg

3. Ensure that you have enabled Snapshot Recording by going to MAIN MENU->STORAGE->RECORD and selecting Enable and then Apply.

Usbssbkup003.jpg

4. Plug in your USB flash drive into the recorder, and select File Backup on the prompt OR go into the MAIN MENU->BACKUP

Usbssbkup004.jpg

Usbssbkup005.jpg

5. Under the Type pull-down menu select PIC for pictures

Usbssbkup006.jpg

Usbssbkup007.jpg

6. Under Record CH select the channel or all channels that you would like to find a screen shot on.

Usbssbkup008.jpg

7. Define a time frame within 24 hours that you would like to search for the Snapshots and select Add

Usbssbkup009.jpg

8. Once a list populates select the Snapshots that you would like to backup and select Start to begin the backup.

Usbssbkup010.jpg

9. A progress bar at the bottom of the window will give you an estimate of when it will complete. You can cancel this operation by selecting Stop.

Usbssbkup011.jpg


10. A prompt will appear on the screen once the process has finished, select okay and remove the USB flash drive with your backup.

Usbssbkup012.jpg