Difference between revisions of "Remote Access/UPNP Function"

Latest revision as of 20:53, 25 July 2016

1. From the local Device Recorder Menu select Networking

2. Select Networking ➞ Select UPnP

3. Select "Enable" ➞ Select OK Apply ➞ Save

@@ Line 1: / Line 1: @@
-<pdf>File:UPNPFunction.pdf</pdf>
+==UPnP (Universal Plug and Play)==
+===Definition===
+*UPNP: Automatically handles port forwarding.
-UPnP (Universal Plug and Play) Automatically handles port forwarding.
+===Prerequisites===
-'''Prerequisites'''
+* Router must support UPnP
-* Router must support UPnP
+* Access the router to enable UPnP
-* Access to router
+===Step by Step Instructions===
+. From the local Device Recorder Menu select Networking
-* UPnP must be enabled from router
+[[File:upnp_wiki.png|500px]]
-* Set mapping type to from automatic to manual from router. The reason for this is because if the router reboots the ports can change.
+. Select Networking ➞ Select UPnP
-'''Step 1.''' From the local Device Recorder Menu select Networking > UPnP > Select "Enable"
+[[File:upnp_wiki_1.png|500px]]
+. Select "Enable" ➞ Select OK Apply ➞ Save
+[[File:upnp_wiki_2.png|500px]]
+[[Category:Remote Access]]
+[[Category:IP Camera]]
+[[Category:HCVR]]
+[[Category:NVR]]
+{{Template:Footer:Remote_Access}}