Notice: Firmware Links Under Maintenance We are currently undergoing maintenance on all firmware links. If any links are inaccessible, please email or contact Tech Support for the firmware. We appreciate your patience during the maintenance, thank you for your understanding.
Difference between revisions of "Backup/NM Standby Setup"
| Line 1: | Line 1: | ||
| − | '''Note''' | + | '''Note :''' |
1. All NVRs must be the same model and upgraded with the same firmware. | 1. All NVRs must be the same model and upgraded with the same firmware. | ||
| Line 13: | Line 13: | ||
NVR when Master NVR recovered, the Master NVR will start to record and you can do | NVR when Master NVR recovered, the Master NVR will start to record and you can do | ||
playback from it. | playback from it. | ||
| + | |||
| + | [[File:nm2.png|500px]] | ||
Revision as of 16:33, 6 May 2016
Note :
1. All NVRs must be the same model and upgraded with the same firmware.
2. All NVRs must be in the same IP segment.
3. When Master NVR fail down and the Slave NVR will take over the task of it and then keep recording, but both of them will lose 90~120s recordings cos the Slave NVR need time to judge if the Master NVR is really offline. Meanwhile, you cannot do playback from any one of them.
4. But when you manually past the task and recordings from Slave NVR to the Master NVR when Master NVR recovered, the Master NVR will start to record and you can do playback from it.
