Notice: Firmware Links Under Maintenance We are currently undergoing maintenance on all firmware links. If any links are inaccessible, please email or contact Tech Support for the firmware. We appreciate your patience during the maintenance, thank you for your understanding.

Difference between revisions of "Networking/Bandwidth Load and Compression"

 
Line 3: Line 3:
  
 
* This is the data transfer rate.
 
* This is the data transfer rate.
* Usually measured in Mbps(Megabits per second).
+
* Usually measured in Kbps(Kilobits per second).
  
 
[[File:bandwidth3.png|500px]]
 
[[File:bandwidth3.png|500px]]

Latest revision as of 21:39, 22 June 2016

Bandwidth, Load, and Compression

Bandwidth

  • This is the data transfer rate.
  • Usually measured in Kbps(Kilobits per second).

Bandwidth3.png

Load

  • A high load would be compressing H.265 since it is compressing at a harder algorithm.
  • H.264b would be low load since it take less CPU power to compress it.

NVRiInfoNetworkLoad.png

Compression

  • Used to reduce storage in hardware.
  • Video compression are usually H.264B, H.264, H.265H, and H.265.
  • For more information on H.265 vs H.264, visit here.
  • H.264H use more complex encoding algorithms and will produce better quality video at an equivalent transfer rate.
  • Baseline profile is easier to decode, but Main and High profiles offer better compression and therefore use less bandwidth to achieve the same quality stream

Compression1.jpg