Difference between revisions of "EventAbnormality"
(Created page with "===Abnormality=== Abnormality includes: * No SD Card * Capacity Warning * SD Card Error * Disconnection * IP Conflict * Unauthorized Access Note:Only devices with SD card f...") |
|||
Line 1: | Line 1: | ||
===Abnormality=== | ===Abnormality=== | ||
− | |||
Abnormality includes: | Abnormality includes: | ||
Line 15: | Line 14: | ||
* Capacity warning | * Capacity warning | ||
* SD card error. | * SD card error. | ||
+ | |||
[[file:IPCEventSDCard.jpg|800px]] | [[file:IPCEventSDCard.jpg|800px]] | ||
+ | |||
+ | {| class="wikitable" width="544" | ||
+ | |- | ||
+ | | width="80"| | ||
+ | Parameter | ||
+ | |||
+ | | width="464"| | ||
+ | Function | ||
+ | |||
+ | |- | ||
+ | | width="80"| | ||
+ | Enable | ||
+ | |||
+ | | width="464"| | ||
+ | Check to alarm when SD card is abnormal. | ||
+ | |||
+ | |- | ||
+ | | width="80"| | ||
+ | Relay-out | ||
+ | |||
+ | | width="464"| | ||
+ | Check to enable relay-out alarm. | ||
+ | |||
+ | |- | ||
+ | | width="80"| | ||
+ | Relay out delay | ||
+ | |||
+ | | width="464"| | ||
+ | The alarm output can delay for the specified time after alarm stops. The value ranges from 10s to 300s. | ||
+ | |||
+ | Note: | ||
+ | |||
+ | No SD card, capacity warning, SD card error, relay-out delay all start from alarm occurs. | ||
+ | |||
+ | |- | ||
+ | | width="80"| | ||
+ | Send email | ||
+ | |||
+ | | width="464"| | ||
+ | After you enabled this function, the system can send out email to alarm the specified user. | ||
+ | |||
+ | This function is invalid when network is offline or IP conflict occurs. | ||
+ | |||
+ | |- | ||
+ | | width="80"| | ||
+ | SD Card Capacity Limit | ||
+ | |||
+ | | width="464"| | ||
+ | User can set SD card capacity that is left free. When SD card space left is smaller than this limit, alarm occurs. | ||
+ | |||
+ | |} |
Revision as of 20:02, 14 October 2015
Abnormality
Abnormality includes:
- No SD Card
- Capacity Warning
- SD Card Error
- Disconnection
- IP Conflict
- Unauthorized Access
Note:Only devices with SD card function has the following statuses:
- No SD card
- Capacity warning
- SD card error.
Parameter |
Function |
Enable |
Check to alarm when SD card is abnormal. |
Relay-out |
Check to enable relay-out alarm. |
Relay out delay |
The alarm output can delay for the specified time after alarm stops. The value ranges from 10s to 300s. Note: No SD card, capacity warning, SD card error, relay-out delay all start from alarm occurs. |
Send email |
After you enabled this function, the system can send out email to alarm the specified user. This function is invalid when network is offline or IP conflict occurs. |
SD Card Capacity Limit |
User can set SD card capacity that is left free. When SD card space left is smaller than this limit, alarm occurs. |