Notice: Firmware Links Under Maintenance We are currently undergoing maintenance on all firmware links. If any links are inaccessible, please email or contact Tech Support for the firmware. We appreciate your patience during the maintenance, thank you for your understanding.
Difference between revisions of "Troubleshoot/NVR/Rebooting System"
(Created page with "===NVR randomly rebooting=== * Disconnect HDD and boot NVR. If NVR boots without HDD, then HDD has failed or is not compatible.") |
|||
| Line 1: | Line 1: | ||
| − | ===NVR | + | ===NVR Randomly Rebooting or Shutting Down === |
* Disconnect HDD and boot NVR. If NVR boots without HDD, then HDD has failed or is not compatible. | * Disconnect HDD and boot NVR. If NVR boots without HDD, then HDD has failed or is not compatible. | ||
| + | There are following possibilities: | ||
| + | *Input voltage is not stable or it is too low. | ||
| + | *HDD malfunction or something wrong wit the ribbon. | ||
| + | *Button power is not enough. | ||
| + | *Front video signal is not stable. | ||
| + | *Working environment is too harsh, too much dust. | ||
| + | *Hardware malfunction. | ||
Revision as of 22:05, 5 October 2015
NVR Randomly Rebooting or Shutting Down
- Disconnect HDD and boot NVR. If NVR boots without HDD, then HDD has failed or is not compatible.
There are following possibilities:
- Input voltage is not stable or it is too low.
- HDD malfunction or something wrong wit the ribbon.
- Button power is not enough.
- Front video signal is not stable.
- Working environment is too harsh, too much dust.
- Hardware malfunction.
