Difference between revisions of "USA/HDCVI/DVR/Pro/X24A3L"
| Line 35: | Line 35: | ||
{| class="wikitable" | {| class="wikitable" | ||
|Firmware Version | |Firmware Version | ||
| − | | | + | | |
|- | |- | ||
|Smart IPC (Front-end Intelligent) | |Smart IPC (Front-end Intelligent) | ||
Revision as of 17:49, 19 September 2018
Contents
X24A3L
Note
- When all IP channels are enabled on this device, HDMI 2 will be disabled
- To configure HDMI 1 video settings, use Tour
- To configure HDMI 2 video settings, use Video Matrix
Features
- Embedded Processor
- Dual-stream Recording
- Smart H.264+ Video Compression
- Auto-detect and auto-configuration of HDCVI, AHD, CVBS, TVI, and IP Cameras
- Maximum 16+8 Camera Channels, up to 5 MP per IP Channel
- Maximum 96 Mbps Incoming Bandwidth
- Smart Search and Intelligent Video System
- Spot Output
Firmware Update Instructions
- Instructions for Firmware Update via USB
- Instructions for Firmware Update via ConfigTool
- Instructions for Firmware Update via Internet Explorer
Firmware Update Download
HD-CVI Tech
| Firmware Version | |
| Smart IPC (Front-end Intelligent) | Yes |
| Smart 2.0 | Yes |
| VQA | Yes |
| Back-end Intelligent | |
| IVS | 1-ch |
| Face Detection | 1-ch |
| People Counting | N/A |
| Smart Tracking | N/A |
| HDCVI 4MP Fisheye preview | N/A |
| Fisheye dewarp | |
| Local | N/A |
| Web | N/A |
| SmartPSS | N/A |
| Smart264 Encode | Yes |
| Smart265 Encode | N/A |
| Smart265 Decode | N/A |
Specifications
| System | |
| Main Processor | Embedded Processor |
| Operating System | Embedded Linux |
| Display | |
| Interface | Two (2) HDMI ports |
| One (1) VGA port | |
| One (1) 1 TV port | |
| Spot Output (Video Matrix) | HDMI-2 Interface |
| Resolution | 1920 x 1080, 1280 x 1024, 1280 x 720, 1024 x 768 |
| Multi-screen Display | 1/4/8/9/16/25 1/4/8/9/16/25/36 |
| Privacy Masking | Four (4) Rectangular Zones (each camera) |
| On-screen Display | Camera Title, Time, Video Loss, Camera Lock, Motion Detection, Recording |
| Video Detection and Alarm | |
| Trigger Events | Recording, PTZ, Tour, Alarm Out, Video Push, Email, FTP, Snapshot, Buzzer and Screen Tips |
| Video Detection | Motion Detection, MD Zones: 396 (22 × 18), Video Loss, Tampering and Diagnosis |
| Alarm Input | 16 Channels |
| Relay Output | Six (6) Channels |
| Playback and Backup | |
| Playback | 1/4/9/16 |
| Search Mode | Time /Date, Alarm, MD and Exact Search |
| (accurate to 1 second) | |
| Playback Function | Play, Pause, Stop, Rewind, Fast play, Slow Play, Next File, Previous File, Next Camera, Previous Camera, Full Screen, Repeat, Shuffle, Backup Selection, Digital Zoom |
| Backup Mode | USB Device and Network |
| Storage | |
| Internal HDD | 4 SATA Ports, up to 8 TB capacity for each disk |
| HDD Mode | Single |
| eSATA | One (1) |
| Auxiliary Interface | |
| USB | One (1) USB 2.0 port |
| Two (2) USB 3.0 ports | |
| RS232 | One (1) Port for PC Communication and Keyboard |
| RS485 | One (1) Port for PTZ Control |
| Audio and Video | |
| HDCVI Camera Input | 16 Channels |
| IP Camera Input | 16+8 Channels, each channel up to 5 MP |
| Audio | Input: 16 Channels |
| Output: One (1) Channel | |
| Two-way Talk | Input: One (1) BNC Microphone Connector |
| Output: One (1) BNC Microphone Connector | |
| Recording | |
| Compression | Smart H.264+, H.264, MJPEG |
| Resolution | 1080p, 720p, 960H, D1, HD1, BCIF, CIF, QCIF |
| Record Rate | |
| Main Stream | 1080p at 15 fps 1080N, 720p, 960H, D1, HD1, BCIF, CIF, QCIF at 30 fps |
| Sub Stream | D1, CIF, QCIF at 15 fps |
| Bit Rate | 1 Kbps to 6144 Kbps per Channel |
| Record Mode | Manual, Schedule (Regular, Continuous), MD (Video Detection: Motion Detection, Video Loss, Tampering), Alarm, Stop |
| Record Interval | 1 to 60 minutes (default: 60 minutes), |
| Pre-record: 1 to 30 s, | |
| Post-record: 10 to 300 s | |
| Network | |
| Interface | One (1) RJ-45 Port (1000 Mbps ) |
| Network Function | HTTP, TCP/IP, IPv4/IPv6, UPnP, RTSP, UDP, SMTP, NTP, DHCP, DNS, IP Filter, PPPoE,DDNS, FTP, Alarm Server, P2P, IP Search (Supports Dahua IP cameras, DVRs, NVS) |
| Maximum User Access | 128 Users |
| Mobile Operating System | IOS, Android |
| Interoperability | ONVIF 2.4.1, CGI Conformant |
| Electrical | |
| Power Supply | 100 to 240 VAC, 50/60 Hz |
| Power Consumption | < 35 W, without HDD |
| Environmental | |
| Operating Conditions | -10° C to +55° C (+14° F to +131° F), 86 to 106 kpa |
| Storage Conditions | -20° C to +70° C (-4° F to +158° F), 0 to 90% RH |
| Construction | |
| Dimensions | 1.5U, 440.0 mm x 416.70 mm x 76.0 mm (17.30 in. x 16.40 in. x 3.0 in.) |
| Net Weight | 6.0 kg (13.32 lb), without HDD |
| Gross Weight | 7.0 kg (15.43 lb) |
| Installation | Desktop or Rack-mount Installation |
| Certifications | |
| Safety | Complies with UL Standard |
| Electromagnetic Compatibility (EMC) | FCC: VFHKEM1612001679IT |
| CE: SHEM161100752701ITC | |
| Intelligence | |
| IVS triggers an alarm and takes a defined action for the following events: | |
| Standard Features | Tampering with the camera. |
| Error writing to an onboard Micro SD card. | |
| Error sending or receiving data over the network. | |
| Unauthorized access to the camera. | |
| Premium Features (available on 1 analog channel) | |
| Motion | An object moves through any part of the scene. |
| Tripwire | A target crosses a user-defined line. |
| Intrusion | A target enters or exits a defined perimeter. |
| Scene Change | A person or object moves the camera to change the scene or covers the camera to obscure the scene. |
| Abandoned/Missing Object | A target leaves an object in designated area, or a target removes an object from the same designated area. |
| Advanced Features (available on the first analog channel) | |
| Facial Detection | Detects and captures a snapshot of human face in a defined area within a scene. |
| The IVS features are operational only when the additional IP channel feature is not active. The XVR supports only IVS or the additional IP channel inputs, both features cannot be in use simultaneously. | |
