Difference between revisions of ":Internal Only/SOP/LHB926 Continuous Recording"
(Created page with "=LHB926 Continuous Recording= ==Purpose== This procedure provides guidance about how to configure the LHB926 to use Continuous Recording ==Requirements== * LHB926 * Hard driv...") |
(→FAQ) |
||
Line 44: | Line 44: | ||
− | + | 1. Power off the system | |
− | + | 2. Take the cover off the system | |
− | + | 3. Hold the reset button down | |
− | + | 4. Power on the system while holding the button down | |
− | + | 5. Wait for the system to emit a long beep or series of beeps | |
− | + | 6. Let go of the reset button | |
− | + | 7. The system has now been reset to factory parameters (including the password) | |
|} | |} |
Latest revision as of 20:00, 20 March 2019
LHB926 Continuous Recording
Purpose
This procedure provides guidance about how to configure the LHB926 to use Continuous Recording
Requirements
- LHB926
- Hard drive must be installed in the LHB926
- Power adapter for the cameras (MicroUSB power adapter with 5V 2A minimum as supplied or of similar quality)
FAQ
Model | Detail |
---|---|
Models with reset button |
LHV5100/W Series DV800 Series DV900 Series M5100 Series M6100 Series LNR6108X NR900X Series LNR600X Series
|
Reset button procedure |
To perform the reset procedure please follow these steps:
2. Take the cover off the system 3. Hold the reset button down 4. Power on the system while holding the button down 5. Wait for the system to emit a long beep or series of beeps 6. Let go of the reset button 7. The system has now been reset to factory parameters (including the password)
|