Difference between revisions of "SmartPSS/How To Setup Event Alarm Link"

Revision as of 18:02, 28 March 2019

How To Setup Event Alarm Link In SmartPSS

Description

This article will show you how to setup the Event Alarm Link feature in SmartPSS 2.0

Prerequisites

• SmartPSS
• Devices added to SmartPSS Device List - How To Add Device to SmartPSS

Video Instructions

Coming Soon

Step by Step Instructions

1. Launch SmartPSS.

2. Click 'Event Config'

3. The Event Config menu will appear.

4. Click to select the device you wish to configure from the Device Tree on the left

5. Select the Event Type for this camera

6. Use the tabs on the right to set up the parameters for when the Event is triggered.

Notify

When the event occurs it can give a notification.

Notification types:

Alarm Sound: Play sound at local computer

EMap Twinkle: Twinkle notification on EMap

Send Mail: Send an email

Link Video

When event occurs it can link to a camera preview or record.

Drag and drop a device from device tree into the grid layout in the center of the screen

Select from the pre-configured layouts or create your own

• Preset point: Allows the user to select a preset point for supported cameras such as PTZ - SmartPSS/How To Use PTZ Preset in SmartPSS
• Stay Time: Time (in seconds) for video . Click the 'Pencil' icon at the top of the list to change the value for the entire list.
• Stream Type: Select which video stream: Main Stream, Sub Stream1, etc. Click the 'Pencil' icon at the top of the list to change the value for the entire list.
• Operation: Use the icons to Preview the stream, move the event up or down in the list order, or delete the event.

Alarm Output

When event occurs it can output a signal to trigger an alarm directly on the camera.

Select the device from the device tree

Set Auto Open

Duration: Enter a time for the alarm output (in seconds)

Defence Time