Difference between revisions of "SmartPSS/How To Setup Video Wall"

Revision as of 22:32, 8 April 2019

How To Setup Video Wall In SmartPSS

Description

This article will show you how to setup a video wall in SmartPSS 2.0

Prerequisites

• SmartPSS
• Supported device with video wall feature, such as Decoder
• Device added to SmartPSS Device List - How To Add Device to SmartPSS

Video Instructions

Step by Step Instructions

1. Launch SmartPSS.

2. Click Video Wall

3. The device tree on the left will show all devices added to SmartPSS that are compatible with the Video Wall feature.

4. Click the icon to open the Video Wall Layout Setup menu.

Click the + to create a new layout

The Video Wall Layout Setup menu is where you can define the physical layout of the monitor outputs per device

5. Use the menu buttons below the grid to create the Video Wall Layout.

Start by clicking one of the layout options in the bottom left of the screen (1, 2x2, 3x3, etc.).

Click again in the grid to place the grid.

You can also use the menu on the right to combine or splice screens.

Click Next

7. A device tree will appear on the left.

Drag and drop from the device tree to the grid layout to configure the arrangement for the corresponding monitor outputs for the device

6. Click Finish once the Video Layout has been created

In this example, a decoder with 4 Monitor Outputs has been arranged in a 2X2 Layout

7. Use the device tree on the left to drag and drop streams into the Video Wall Layout

Click inside a quadrant and click from one of the layout options to change to one of the available options - 1 , 2X2, 3X3, 4X4