Difference between revisions of "3rd Party VMS/Control4"
(→Prerequisites) |
(→Prerequisites) |
||
Line 7: | Line 7: | ||
*https://my.control4.com/ Account | *https://my.control4.com/ Account | ||
*Dahua Device configured for Static IP or DHCP Reservation | *Dahua Device configured for Static IP or DHCP Reservation | ||
+ | ==Features== | ||
+ | *Allows NVR Icon on Watch Menu, and Connection paths for HDMI and VGA into a Control4 video system | ||
+ | *Event Connection for Triggers FROM NVR (using either, connection binding or Composer Event) | ||
+ | *NUMBER buttons select that channel (example: Button 6 = Camera 6 on the TV) | ||
+ | *Setup RED, GREEN, YELLOW, and BLUE buttons to trigger different views on TV | ||
+ | *Uses Control4’s cable Proxy | ||
+ | *Connection paths for camera proxy interface | ||
==Driver List== | ==Driver List== |
Revision as of 17:43, 10 April 2019
Contents
Control4
Overview
Using this driver allows a Control4 dealer to add an icon in the watch menu. This will enable the dealer to use the Monitor-Out/HDMI/VGA connector to integrate into Customers Control4.
Prerequisites
- https://my.control4.com/ Account
- Dahua Device configured for Static IP or DHCP Reservation
Features
- Allows NVR Icon on Watch Menu, and Connection paths for HDMI and VGA into a Control4 video system
- Event Connection for Triggers FROM NVR (using either, connection binding or Composer Event)
- NUMBER buttons select that channel (example: Button 6 = Camera 6 on the TV)
- Setup RED, GREEN, YELLOW, and BLUE buttons to trigger different views on TV
- Uses Control4’s cable Proxy
- Connection paths for camera proxy interface
Driver List
- Dahua NVR Driver
- Dahua Fixed Driver
- Dahua PT Driver
- Dahua PTZ Driver
Dahua Firmware to Enable Control4 Integration
Model | Firmware |
---|---|
X72A2A | |
X51A3E | |
X52A3A | |
X52A3N | |
X51A1E | |
X51A2E | |
X72A3A | |
X54A5L | |
X58A5S |