Notice: Firmware Links Under Maintenance We are currently undergoing maintenance on all firmware links. If any links are inaccessible, please email or contact Tech Support for the firmware. We appreciate your patience during the maintenance, thank you for your understanding.

Difference between revisions of "VideoLossCam"

Line 1: Line 1:
 
===After I connected to the IP channel, there one*window output is OK, but there is no multiple*window output.===
 
===After I connected to the IP channel, there one*window output is OK, but there is no multiple*window output.===
 
There are following possibilities:
 
There are following possibilities:
*Check the sub stream of the camera has been enabled or not.  
+
 
*Check the sub stream type of the camera is H.264 or not.  
+
* Check the sub stream of the camera has been enabled or not.
*Check the device supports camera sub stream resolution or not (such as 960H, D1,CIF,etc.)
+
* Check the sub stream type of the camera is H.264 or not.
 +
* Check the device supports camera sub stream resolution or not (such as 960H, D1,CIF,etc.)
  
 
[[File:sub_stream_web_enable.jpg|left]]
 
[[File:sub_stream_web_enable.jpg|left]]
 +
 +
[[Category:Troubleshoot]]
 +
[[Category:Camera Troubleshoot]]

Revision as of 17:22, 18 April 2016

After I connected to the IP channel, there one*window output is OK, but there is no multiple*window output.

There are following possibilities:

  • Check the sub stream of the camera has been enabled or not.
  • Check the sub stream type of the camera is H.264 or not.
  • Check the device supports camera sub stream resolution or not (such as 960H, D1,CIF,etc.)
Sub stream web enable.jpg