Notice: Firmware Links Under Maintenance We are currently undergoing maintenance on all firmware links. If any links are inaccessible, please email or contact Tech Support for the firmware. We appreciate your patience during the maintenance, thank you for your understanding.
Difference between revisions of "Software/Dahua Toolbox/VDPConfig/Upgrade Firmware"
(→Step by Step Instructions) |
|||
| Line 18: | Line 18: | ||
[[File:Upgrade_Firmware_-_VDPConfig_-_1.jpg|600px]] | [[File:Upgrade_Firmware_-_VDPConfig_-_1.jpg|600px]] | ||
| + | 2. Click the Upgrade icon on the left (Arrow) | ||
[[File:Upgrade_Firmware_-_VDPConfig_-_2.jpg|600px]] | [[File:Upgrade_Firmware_-_VDPConfig_-_2.jpg|600px]] | ||
| + | |||
| + | 3. Click Search Setting | ||
[[File:Upgrade_Firmware_-_VDPConfig_-_3.jpg|600px]] | [[File:Upgrade_Firmware_-_VDPConfig_-_3.jpg|600px]] | ||
| + | |||
| + | 4. Enter the password for the device | ||
[[File:Upgrade_Firmware_-_VDPConfig_-_4.jpg|600px]] | [[File:Upgrade_Firmware_-_VDPConfig_-_4.jpg|600px]] | ||
| + | |||
| + | 5. Check the box next to the device you wish to upgrade then click Browser to locate the firmware file | ||
[[File:Upgrade_Firmware_-_VDPConfig_-_5.jpg|600px]] | [[File:Upgrade_Firmware_-_VDPConfig_-_5.jpg|600px]] | ||
| + | |||
| + | 6. Use the window that appears to locate the firmware file | ||
[[File:Upgrade_Firmware_-_VDPConfig_-_6.jpg|600px]] | [[File:Upgrade_Firmware_-_VDPConfig_-_6.jpg|600px]] | ||
| + | |||
| + | 7. Click Upgrade | ||
[[File:Upgrade_Firmware_-_VDPConfig_-_7.jpg|600px]] | [[File:Upgrade_Firmware_-_VDPConfig_-_7.jpg|600px]] | ||
| + | |||
| + | 8. Upgrade SEtup window will appear | ||
| + | |||
| + | Clear Config must be '''enabled'''. | ||
| + | |||
| + | Check the box next Clear Config then click OK to begin the upgrade | ||
[[File:Upgrade_Firmware_-_VDPConfig_-_8.jpg|600px]] | [[File:Upgrade_Firmware_-_VDPConfig_-_8.jpg|600px]] | ||
| + | |||
| + | 9. The upgrade status will display via a progress bar | ||
[[File:Upgrade_Firmware_-_VDPConfig_-_9.jpg|600px]] | [[File:Upgrade_Firmware_-_VDPConfig_-_9.jpg|600px]] | ||
[[File:Upgrade_Firmware_-_VDPConfig_-_10.jpg|600px]] | [[File:Upgrade_Firmware_-_VDPConfig_-_10.jpg|600px]] | ||
| + | |||
| + | |||
| + | When the firmware upgrade is complete a green checkmark will appear next to the device | ||
| + | |||
| + | [[File:Upgrade_Firmware_-_VDPConfig_-_11.jpg|600px]] | ||
Revision as of 17:55, 10 June 2019
Contents
How To Upgrade Firmware In VDPConfig
Description
This guide will show you how to upgrade the firmware of a device using VDPConfig
- Note: If
Prerequisites
- ConfigTool Version 4.05
- ConfigTool Downloads
- Windows PC.
- Dahua Devices on the same LAN as the PC for using the ConfigTool.
Step by Step Instructions
1. Open DahuaToolbox and click Open next to VDPConfig
2. Click the Upgrade icon on the left (Arrow)
3. Click Search Setting
4. Enter the password for the device
5. Check the box next to the device you wish to upgrade then click Browser to locate the firmware file
6. Use the window that appears to locate the firmware file
7. Click Upgrade
8. Upgrade SEtup window will appear
Clear Config must be enabled.
Check the box next Clear Config then click OK to begin the upgrade
9. The upgrade status will display via a progress bar
When the firmware upgrade is complete a green checkmark will appear next to the device
