Difference between revisions of "Software/Dahua Toolbox/VDPConfig/Upgrade Firmware"

(Step by Step Instructions)
Line 3: Line 3:
 
===Description===
 
===Description===
 
This guide will show you how to upgrade the firmware of a device using VDPConfig
 
This guide will show you how to upgrade the firmware of a device using VDPConfig
 
* Note: If
 
  
 
===Prerequisites===
 
===Prerequisites===

Revision as of 17:56, 10 June 2019

How To Upgrade Firmware In VDPConfig

Description

This guide will show you how to upgrade the firmware of a device using VDPConfig

Prerequisites

  • ConfigTool Version 4.05
  • ConfigTool Downloads
  • Windows PC.
  • Dahua Devices on the same LAN as the PC for using the ConfigTool.

Step by Step Instructions

1. Open DahuaToolbox and click Open next to VDPConfig


Upgrade Firmware - VDPConfig - 1.jpg

2. Click the Upgrade icon on the left (Arrow)

Upgrade Firmware - VDPConfig - 2.jpg

3. Click Search Setting

Upgrade Firmware - VDPConfig - 3.jpg

4. Enter the password for the device

Upgrade Firmware - VDPConfig - 4.jpg

5. Check the box next to the device you wish to upgrade then click Browser to locate the firmware file

Upgrade Firmware - VDPConfig - 5.jpg

6. Use the window that appears to locate the firmware file

Upgrade Firmware - VDPConfig - 6.jpg

7. Click Upgrade

Upgrade Firmware - VDPConfig - 7.jpg

8. Upgrade SEtup window will appear

Clear Config must be enabled.

Check the box next Clear Config then click OK to begin the upgrade

Upgrade Firmware - VDPConfig - 8.jpg

9. The upgrade status will display via a progress bar

Upgrade Firmware - VDPConfig - 9.jpg

Upgrade Firmware - VDPConfig - 10.jpg


When the firmware upgrade is complete a green checkmark will appear next to the device

Upgrade Firmware - VDPConfig - 11.jpg