Difference between revisions of "NVR/Recording Setup/Physical Alarm"
(→Physical Alarm Setup) |
(→Physical Alarm Setup) |
||
| Line 12: | Line 12: | ||
'''STEP 2.''' Connect the N.C. (Normally Closed) wire to one of the numbered ports. Connect the COM wire to the COM / Ground Port. | '''STEP 2.''' Connect the N.C. (Normally Closed) wire to one of the numbered ports. Connect the COM wire to the COM / Ground Port. | ||
| − | Ala r m Inputs are grouped in fours. Each group uses the Communication/Ground Port on the right. | + | Ala r m Inputs are grouped in fours. |
| + | *Each group uses the Communication/Ground Port on the right. | ||
[[File:physical_alarm_2.png|none|889x500px]] | [[File:physical_alarm_2.png|none|889x500px]] | ||
Revision as of 20:57, 30 December 2015
Physical Alarm Setup
Please Note: Setting up alarm triggers will only work with recorders that have alarm inputs.
STEP 1. Identify the connections on the Alarm Trigger.
- COM: Communication Port or Ground N.C: Normally Closed - A Trigger that initiates when an object disrupts the communication line of 2 sensors
- N.C: Normally Closed - A Trigger that initiates when an object disrupts the communication line of 2 sensors
- N.O: Normally Open - A Trigger that initiates when an object completes the communication line of 2 sensors.
STEP 2. Connect the N.C. (Normally Closed) wire to one of the numbered ports. Connect the COM wire to the COM / Ground Port.
Ala r m Inputs are grouped in fours.
- Each group uses the Communication/Ground Port on the right.
