Notice: Firmware Links Under Maintenance We are currently undergoing maintenance on all firmware links. If any links are inaccessible, please email or contact Tech Support for the firmware. We appreciate your patience during the maintenance, thank you for your understanding.
Difference between revisions of "NVR/Recording Setup/Multicast Setup"
(→How to Setup Multicast) |
(→How to Setup Multicast) |
||
| Line 15: | Line 15: | ||
http://10.15.2.237/cgi-bin/configManager.cgi?action=setConfig&Multicast.RTP[1].Enable=true, | http://10.15.2.237/cgi-bin/configManager.cgi?action=setConfig&Multicast.RTP[1].Enable=true, | ||
| + | |||
| + | '''Step 2.''' Check Multicast information use: | ||
| + | http://ip/cgi-bin/configManager.cgi?action=getConfig&name=Multicast | ||
| + | The default port for RTP[0] is 40000 and for RTP[1] is 40001, the default RTP port is 554. | ||
| + | You can vertify RTP port on the web page setting: | ||
| + | |||
| + | [[File:multicast_wiki_3.png|500px]] | ||
You can see as followed RTP status after putting commend, both enabled are true | You can see as followed RTP status after putting commend, both enabled are true | ||
| Line 20: | Line 27: | ||
Port must be even | Port must be even | ||
| − | [[File: | + | [[File:|500px]] |
Revision as of 15:20, 4 March 2016
How to Setup Multicast
You do not have permission to embed PDF files.
RTP Multicast
Step 1. type in commend to enable RTP multicast of RTP[0] and RTP[1]on Internet Explorer Address bar. http://ip/cgi-bin/configManager.cgi?action=setConfig&Multicast.RTP[0].Enable=true my IPC's IP address is 10.25.2.237, so this commend should be http://10.15.2.237/cgi-bin/configManager.cgi?action=setConfig&Multicast.RTP[0].Enable=true WEB page will let you enter login and password, then it will shows "OK"
You can also use this command and will show "Ok" as the same result.
http://10.15.2.237/cgi-bin/configManager.cgi?action=setConfig&Multicast.RTP[1].Enable=true,
Step 2. Check Multicast information use: http://ip/cgi-bin/configManager.cgi?action=getConfig&name=Multicast The default port for RTP[0] is 40000 and for RTP[1] is 40001, the default RTP port is 554. You can vertify RTP port on the web page setting:
You can see as followed RTP status after putting commend, both enabled are true Please note, for RTP multicast, both RTP [0] and [1] must enabled; The RTSP Port must be even
[[File:|500px]]
