Notice: Firmware Links Under Maintenance We are currently undergoing maintenance on all firmware links. If any links are inaccessible, please email or contact Tech Support for the firmware. We appreciate your patience during the maintenance, thank you for your understanding.
Difference between revisions of "Troubleshoot/NVR/Display Troubleshoot"
m (JP moved page DisplayTroubleshoot to Troubleshoot/NVR/Display Troubleshoot) |
|
(No difference)
| |
Revision as of 18:00, 16 March 2016
The displayed video is not full in the monitor.
- Please do the following:
- Check your physical connections from the system to the monitor.
- If a VGA connection, ensure the screws are tight.
- On the monitor check the current resolution setup. If the current setup is 1920*1080, then you need to set the monitor resolution as 1920*1080 or 1080P capable.
