Notice: Firmware Links Under Maintenance We are currently undergoing maintenance on all firmware links. If any links are inaccessible, please email or contact Tech Support for the firmware. We appreciate your patience during the maintenance, thank you for your understanding.
Difference between revisions of "Troubleshoot/NVR/Troubleshoot Date and Time"
m (JP moved page DateTime to Troubleshoot/NVR/Troubleshoot Date and Time) |
|||
| Line 1: | Line 1: | ||
How to set the date and time | How to set the date and time | ||
| + | |||
===Time display is not correct.=== | ===Time display is not correct.=== | ||
There are following possibilities: | There are following possibilities: | ||
| − | |||
| − | |||
| − | |||
| − | 1. Make sure the "Time Zone" is set correctly. | + | * Setup is not correct |
| + | * Battery contact is not correct or voltage is too low. | ||
| + | * Crystal is broken. | ||
| + | |||
| + | 1. Make sure the "Time Zone" is set correctly. | ||
| − | [[file:DateandTimeTroubleshoot1.png]] | + | [[file:DateandTimeTroubleshoot1.png|550px]] |
GMT stands for Greenwich Mean Time. | GMT stands for Greenwich Mean Time. | ||
| − | *Eastern Standard Time: | + | * Eastern Standard Time: GMT - 05:00 |
| − | *Central Standard Time: | + | * Central Standard Time: GMT - 06:00 |
| − | *Mountain Standard Time: | + | * Mountain Standard Time: GMT - 07:00 |
| − | *Pacific Standard Time: | + | * Pacific Standard Time: GMT - 08:00 |
| − | *Alaskan Standard Time: | + | * Alaskan Standard Time: GMT - 09:00 |
| − | *Hawaii-Aleutian Standard Time: | + | * Hawaii-Aleutian Standard Time: GMT - 10:00 |
| − | 2. Setup DST, if applicable. | + | 2. Setup DST, if applicable. |
| − | *Daylight Savings Time begins the 2nd week of March | + | * Daylight Savings Time begins the 2nd week of March |
| − | *Daylight Savings Time ends the 1st week of November. | + | * Daylight Savings Time ends the 1st week of November. |
| − | [[file:DateandTimeTroubleshoot2.png]] | + | [[file:DateandTimeTroubleshoot2.png|550px]] |
| − | 3. "Sync PC" if all else fails. | + | 3. "Sync PC" if all else fails. |
| − | [[file:DateandTimeTroubleshoot3.png]] | + | [[file:DateandTimeTroubleshoot3.png|550px]] |
| − | 4. Click, "OK" to save your changes. | + | 4. Click, "OK" to save your changes. |
| − | [[file:DateandTimeTroubleshoot4.png]] | + | [[file:DateandTimeTroubleshoot4.png|550px]] |
[[Category:Record Setup]] | [[Category:Record Setup]] | ||
[[Category:Troubleshoot]] | [[Category:Troubleshoot]] | ||
Revision as of 22:58, 18 April 2016
How to set the date and time
Time display is not correct.
There are following possibilities:
- Setup is not correct
- Battery contact is not correct or voltage is too low.
- Crystal is broken.
1. Make sure the "Time Zone" is set correctly.
GMT stands for Greenwich Mean Time.
- Eastern Standard Time: GMT - 05:00
- Central Standard Time: GMT - 06:00
- Mountain Standard Time: GMT - 07:00
- Pacific Standard Time: GMT - 08:00
- Alaskan Standard Time: GMT - 09:00
- Hawaii-Aleutian Standard Time: GMT - 10:00
2. Setup DST, if applicable.
- Daylight Savings Time begins the 2nd week of March
- Daylight Savings Time ends the 1st week of November.
3. "Sync PC" if all else fails.
4. Click, "OK" to save your changes.
