Notice: Firmware Links Under Maintenance We are currently undergoing maintenance on all firmware links. If any links are inaccessible, please email or contact Tech Support for the firmware. We appreciate your patience during the maintenance, thank you for your understanding.
Difference between revisions of "Troubleshoot/NVR/Display Troubleshoot"
| Line 5: | Line 5: | ||
* If a VGA connection, ensure the screws are tight. | * If a VGA connection, ensure the screws are tight. | ||
* If a DVI connection, also ensure the screws are tight. | * If a DVI connection, also ensure the screws are tight. | ||
| + | * If a HDMI connection, make sure the monitor is 1080p. | ||
| + | * If a DP connection, make sure the monitor is at least 1080p. | ||
* On the monitor check the current resolution setup. If the current setup is 1920*1080, then you need to set the monitor resolution as 1920*1080 or 1080P capable. | * On the monitor check the current resolution setup. If the current setup is 1920*1080, then you need to set the monitor resolution as 1920*1080 or 1080P capable. | ||
Revision as of 16:36, 3 May 2016
The displayed video is not full in the monitor.
- Please do the following:
- Check your physical connections from the system to the monitor.
- Check your aspect ratio.
- If a VGA connection, ensure the screws are tight.
- If a DVI connection, also ensure the screws are tight.
- If a HDMI connection, make sure the monitor is 1080p.
- If a DP connection, make sure the monitor is at least 1080p.
- On the monitor check the current resolution setup. If the current setup is 1920*1080, then you need to set the monitor resolution as 1920*1080 or 1080P capable.
