Difference between revisions of "NVR/Recording Setup/Alarm Recording Setup"
m (JP moved page Alarm Recording Setup to NVR/Recording Setup/Alarm Recording Setup) |
|||
| Line 1: | Line 1: | ||
==How to Setup Alarm Recording Using A Physical Alarm== | ==How to Setup Alarm Recording Using A Physical Alarm== | ||
===Pre-Requisites=== | ===Pre-Requisites=== | ||
| − | *A NVR or IP Camera with an Alarm Out | + | * A NVR or IP Camera with an Alarm Out |
| + | |||
[[file:PhysicalAlarmRecordSetup8Large.JPG|600px]] | [[file:PhysicalAlarmRecordSetup8Large.JPG|600px]] | ||
| − | *A low voltage physical alarm | + | |
| + | * A low voltage physical alarm | ||
| + | |||
[[file:PhysicalAlarmRecordSetup1Large.JPG|600px]] | [[file:PhysicalAlarmRecordSetup1Large.JPG|600px]] | ||
| − | *Dual pair 24 gauge run to the physical alarm | + | |
| + | * Dual pair 24 gauge run to the physical alarm | ||
| + | |||
[[file:PhysicalAlarmRecordSetup15Large.JPG|600px]] | [[file:PhysicalAlarmRecordSetup15Large.JPG|600px]] | ||
| − | *Alarm block | + | |
| + | * Alarm block | ||
| + | |||
[[file:PhysicalAlarmRecordSetup6Large.JPG|600px]] | [[file:PhysicalAlarmRecordSetup6Large.JPG|600px]] | ||
| + | |||
===Setup=== | ===Setup=== | ||
| − | 1. Identify which alarm out block you wish to use to connect your physical alarm. For this example we are going to use, "Alarm Out Channel 1" | + | 1. Identify which alarm out block you wish to use to connect your physical alarm. For this example we are going to use, "Alarm Out Channel 1" |
[[file:PhysicalAlarmRecordSetup14.JPG|600px]] | [[file:PhysicalAlarmRecordSetup14.JPG|600px]] | ||
| Line 34: | Line 42: | ||
[[file:AlarmRecordSetup3.png|600px]] | [[file:AlarmRecordSetup3.png|600px]] | ||
| − | 7. Select the Channel, and enable, "Local Alarm" | + | 7. Select the Channel, and enable, "Local Alarm" |
[[file:AlarmRecordSetup4.png|600px]] | [[file:AlarmRecordSetup4.png|600px]] | ||
| − | 8. Select either, "NO" or "NC" | + | 8. Select either, "NO" or "NC" |
<gallery> | <gallery> | ||
File:PhysicalAlarmRecordSetup13Large.JPG|NO -Normally Open | File:PhysicalAlarmRecordSetup13Large.JPG|NO -Normally Open | ||
| Line 46: | Line 54: | ||
[[file:AlarmRecordSetup5.png|600px]] | [[file:AlarmRecordSetup5.png|600px]] | ||
| − | 9. Next select what actions you want the system to perform, when the alarm is activated. | + | 9. Next select what actions you want the system to perform, when the alarm is activated. |
[[file:AlarmRecordSetup6.png|600px]] | [[file:AlarmRecordSetup6.png|600px]] | ||
| Line 56: | Line 64: | ||
[[Category:Record Setup]] | [[Category:Record Setup]] | ||
[[Category:Alarm]] | [[Category:Alarm]] | ||
| + | |||
| + | ===Links=== | ||
| + | <table> | ||
| + | <tr><th colspan="3"> Related Articles in [[:Category:Record]]</th></tr> | ||
| + | <tr><td> | ||
| + | |||
| + | <DynamicPageList> | ||
| + | category = Record | ||
| + | count=5 | ||
| + | </DynamicPageList> | ||
| + | </td> | ||
| + | <td> | ||
| + | <DynamicPageList> | ||
| + | category = Record | ||
| + | offset = 5 | ||
| + | count= 5 | ||
| + | </DynamicPageList> | ||
| + | </td> | ||
| + | <td> | ||
| + | |||
| + | <DynamicPageList> | ||
| + | category = Record | ||
| + | offset = 10 | ||
| + | count=5 | ||
| + | </DynamicPageList> | ||
| + | </td></tr></table> | ||
Revision as of 17:45, 12 May 2016
Contents
How to Setup Alarm Recording Using A Physical Alarm
Pre-Requisites
- A NVR or IP Camera with an Alarm Out
- A low voltage physical alarm
- Dual pair 24 gauge run to the physical alarm
- Alarm block
Setup
1. Identify which alarm out block you wish to use to connect your physical alarm. For this example we are going to use, "Alarm Out Channel 1"
2. Connect the cable to your physical alarm.
->
3. Connect the cable to the alarm block on the ports labeled, "IN1" and "Ground"
4. Login to the NVR, and click, "Setup"
5. Click, "Event"
6. Click, "Alarm"
7. Select the Channel, and enable, "Local Alarm"
8. Select either, "NO" or "NC"
NO -Normally Open
NC -Normally Close
9. Next select what actions you want the system to perform, when the alarm is activated.
10. Click, "OK"
Links
| Related Articles in Category:Record | ||
|---|---|---|
|
<DynamicPageList> category = Record count=5 </DynamicPageList> |
<DynamicPageList> category = Record offset = 5 count= 5 </DynamicPageList> |
<DynamicPageList> category = Record offset = 10 count=5 </DynamicPageList> |
