Notice: Firmware Links Under Maintenance We are currently undergoing maintenance on all firmware links. If any links are inaccessible, please email or contact Tech Support for the firmware. We appreciate your patience during the maintenance, thank you for your understanding.
Difference between revisions of "NoVideoSnap"
Mark Navarro (talk | contribs) (→The device failed to record video and snapshot.) |
Mark Navarro (talk | contribs) (→The device failed to record video and snapshot.) |
||
| Line 6: | Line 6: | ||
# Check if the connection of SD and FTP of video and snapshot storage is normal, try to connect FTP to the computer. | # Check if the connection of SD and FTP of video and snapshot storage is normal, try to connect FTP to the computer. | ||
# Set “video mode” as manual or auto in the WEB interface. | # Set “video mode” as manual or auto in the WEB interface. | ||
| − | # From the WEB interface , make sure snapshot is set to "trigger". Under setup > image > encode > Snapshot > timing > select trigger. This should work for IVS (if available), face detect and motion detection if the snapshot box is checked off or selected from those features. | + | # From the WEB interface , make sure snapshot is set to "trigger". Under setup > image > encode > Snapshot > timing > select trigger. This should work for IVS (if available), face detect and motion detection if the snapshot box is checked off or selected from those '''event''' features. |
Revision as of 21:42, 10 November 2015
The device failed to record video and snapshot.
Possible reason: “Snapshot time period” is set wrongly; storage path is not correct; “video mode” is set as off.
- Set “video time period”, “snapshot time period” in the WEB interface; please refer to the for more details.
- Check if the “memory point” enable in the WEB interface is checked.
- Check if the connection of SD and FTP of video and snapshot storage is normal, try to connect FTP to the computer.
- Set “video mode” as manual or auto in the WEB interface.
- From the WEB interface , make sure snapshot is set to "trigger". Under setup > image > encode > Snapshot > timing > select trigger. This should work for IVS (if available), face detect and motion detection if the snapshot box is checked off or selected from those event features.
