Notice: Firmware Links Under Maintenance We are currently undergoing maintenance on all firmware links. If any links are inaccessible, please email or contact Tech Support for the firmware. We appreciate your patience during the maintenance, thank you for your understanding.
Difference between revisions of "3rd Party VMS/Milestone/Add Dahua Recorder To Milestone"
| Line 1: | Line 1: | ||
=How to Add a Dahua Recorder to Milestone= | =How to Add a Dahua Recorder to Milestone= | ||
| − | |||
| − | |||
==Description== | ==Description== | ||
| + | This article will run through adding a Dahua device to XProtect. | ||
==Prerequisites== | ==Prerequisites== | ||
| + | * X Protect 2017 R3 | ||
| + | * A Dahua X58A3S DVR using firmware: [https://dahuawiki.com/images/Firmware/DH_HCVR8xxx_EngSpnFrn_NP_V3.218.0000.0.R.20170613.zip DH_HCVR8xxx_EngSpnFrn_NP_V3.218.0000.0.R.20170613] | ||
==Video Instructions== | ==Video Instructions== | ||
Revision as of 00:25, 1 February 2018
Contents
How to Add a Dahua Recorder to Milestone
Description
This article will run through adding a Dahua device to XProtect.
Prerequisites
- X Protect 2017 R3
- A Dahua X58A3S DVR using firmware: DH_HCVR8xxx_EngSpnFrn_NP_V3.218.0000.0.R.20170613
Video Instructions
Step by Step Instructions
1. Begin with launching X Protect Management Client 2017 R3.
2. Select Servers -> Recording Servers. Then right-click the recording server you want to add the camera to and select Add Hardware (Cntrl+N).
3. Select Express, then select Next >.
4. Make sure to input the username and password for the devices ONVIF interface, then select Next >.
5. Wait while searching for the camera you want to add.
6.
