Difference between revisions of "NVR/Basic Setup/Connect WiFi Camera"

Line 52: Line 52:
 
*TCP Port: 37777
 
*TCP Port: 37777
  
User Name: admin
+
*User Name: admin
  
Password: (Your IP Camera's password.) Default is, "admin"
+
*Password: (Your IP Camera's password.) Default is, "admin"
  
Remote Channel No. (Any)
+
*Remote Channel No. (Any)
  
Decode Buffer: Default
+
*Decode Buffer: Default
  
 
[[file:WifiSetup9.png]]
 
[[file:WifiSetup9.png]]
  
 
11. Hit, "Save"
 
11. Hit, "Save"

Revision as of 22:32, 14 December 2015

How to Connect a WiFi Camera to NVR

Note: These instructions only apply for WiFi NVRs and Cameras.

1. Connect the NVR and IP Camera directly to your router or modem with a CAT5 cable.

2. Open the ConfigTool and locate your NVR and IP Camera.

3. Login to both using Internet Explorer.

WifiSetup1.png IP Camera Login

WifiSetup2.png NVR Login

4. On the NVR, go to Settings->Network->WiFi Device Manage

WifiSetup3.png

Be sure to note the SSID and Password.

5. On the IP Camera, go to Setup->Network->WiFi

WifiSetup4.png

6. Locate your NVR's SSID, and click once.

WifiSetup5.png

7. Input your NVR's SSID password, and click, "Connecting"

WifiSetup6.png

8. Go back to the NVR page, go to Settings->Network->WiFi Device Manage

WifiSetup7.png

Confirm that the camera is displaying on this page and note the IP address.

9. On the NVR page, go to Setting->Camera->Remote and click, "Manual Add"

WifiSetup8.png

10. Input the following:

  • Channel: (Any)
  • Manufacturer: Private
  • IP Address: (Your IP Camera's IP Address)
  • TCP Port: 37777
  • User Name: admin
  • Password: (Your IP Camera's password.) Default is, "admin"
  • Remote Channel No. (Any)
  • Decode Buffer: Default

WifiSetup9.png

11. Hit, "Save"