Difference between revisions of "SmartPSS/How To Setup Video Wall"
(→How To Setup Video Wall In SmartPSS) |
(→How To Setup Video Wall In SmartPSS) |
||
| Line 31: | Line 31: | ||
Click the + to create a new layout | Click the + to create a new layout | ||
| − | The Video Wall Layout Setup menu is where you can define the physical layout of the monitor outputs per device | + | The Video Wall Layout Setup menu is where you can define the physical layout of the monitor outputs per device |
[[File:How_To_Setup_Video_Wall_SmartPSS_-_5.jpg|600px]] | [[File:How_To_Setup_Video_Wall_SmartPSS_-_5.jpg|600px]] | ||
| Line 46: | Line 46: | ||
You can also use the menu on the right to combine or splice screens. | You can also use the menu on the right to combine or splice screens. | ||
| − | 6. | + | Click Next |
| + | |||
| + | 7. A device tree will appear on the left. | ||
| + | |||
| + | [[File:How_To_Setup_Video_Wall_SmartPSS_-_7.5_.jpg|600px]] | ||
| + | |||
| + | Drag and drop from the device tree to the grid layout to configure the arrangement for the corresponding monitor outputs for the device | ||
| + | |||
| + | [[File:How_To_Setup_Video_Wall_SmartPSS_-_7.6.jpg|600px]] | ||
| + | |||
| + | 6. Click Finish once the Video Layout has been created | ||
| + | |||
| + | [[File:How_To_Setup_Video_Wall_SmartPSS_-_8.jpg|600px]] | ||
| + | |||
| + | In this example, a decoder with 4 Monitor Outputs has been arranged in a 2X2 Layout | ||
| + | |||
| + | 7. | ||
Revision as of 22:25, 8 April 2019
Contents
How To Setup Video Wall In SmartPSS
Description
This article will show you how to setup a video wall in SmartPSS 2.0
Prerequisites
- SmartPSS
- Supported device with video wall feature, such as Decoder
- Device added to SmartPSS Device List - How To Add Device to SmartPSS
Video Instructions
Step by Step Instructions
1. Launch SmartPSS.
2. Click Video Wall
3. The device tree on the left will show all devices added to SmartPSS that are compatible with the Video Wall feature.
4. Click the 
icon to open the Video Wall Layout Setup menu.
Click the + to create a new layout
The Video Wall Layout Setup menu is where you can define the physical layout of the monitor outputs per device
5. Use the menu buttons below the grid to create the Video Wall Layout.
Start by clicking one of the layout options in the bottom left of the screen (1, 2x2, 3x3, etc.).
Click again in the grid to place the grid.
You can also use the menu on the right to combine or splice screens.
Click Next
7. A device tree will appear on the left.
Drag and drop from the device tree to the grid layout to configure the arrangement for the corresponding monitor outputs for the device
6. Click Finish once the Video Layout has been created
In this example, a decoder with 4 Monitor Outputs has been arranged in a 2X2 Layout
7.
