Notice: Firmware Links Under Maintenance We are currently undergoing maintenance on all firmware links. If any links are inaccessible, please email or contact Tech Support for the firmware. We appreciate your patience during the maintenance, thank you for your understanding.
Difference between revisions of "3rd Party VMS/Control4/Add Dahua IP Camera to Control4"
(→Prerequisites) |
(→Prerequisites) |
||
| Line 5: | Line 5: | ||
==Prerequisites== | ==Prerequisites== | ||
*Control4 Composer | *Control4 Composer | ||
| − | *[https://dahuawiki.com/images/Firmware/Control4/3rd_Party_Driver/dahua_camera_nvr_fixed.c4z Control4 Driver for Dahua | + | *[https://dahuawiki.com/images/Firmware/Control4/3rd_Party_Driver/dahua_camera_nvr_fixed.c4z Control4 Driver for Dahua IP Cameras] |
*https://my.control4.com/ Account | *https://my.control4.com/ Account | ||
*Dahua Device configured for Static IP or DHCP Reservation | *Dahua Device configured for Static IP or DHCP Reservation | ||
Revision as of 14:51, 22 April 2019
Contents
How to Add Dahua IP Camera to Control4
Description
Using this driver allows a Control4 dealer to add an icon in the watch menu. This will enable the Control4 System to use the Monitor-Out/HDMI/VGA connector to integrate Dahua devices.
Prerequisites
- Control4 Composer
- Control4 Driver for Dahua IP Cameras
- https://my.control4.com/ Account
- Dahua Device configured for Static IP or DHCP Reservation
- Control4 Firmware for Dahua Device
Video Instructions
Step by Step Instructions
1. Install driver. 800x800px
2. Add camera
3. Configure
