Difference between revisions of "Email/Email Notifications Setup Yahoo"

Revision as of 19:24, 14 June 2019

How to Setup Email Notifications via Yahoo

Prerequisites

• A Yahoo email account to send from
• "Allow apps that use less secure sign in" enabled in Yahoo email Account Security settings
• An email account to send the notifications to
• A Dahua NVR, DVR, or IP Camera

Step by Step Instructions

1. Log in to your Dahua device, then navigate to Setting -> Network -> SMTP(Email).
Input the following information:
- SMTP Server: smtp.mail.yahoo.com
- Port: 465
- Username: [Your Yahoo email address]
- Password: [Your Yahoo email password]
- Sender: [Your Yahoo email address]
- Authentication: SSL
- Title: [Your Prefered Email Subject for Email Notification Messages]

Alternatively, you can use TLS for authentication with these settings:
Port: 587
Authentication: TLS

2. In the "Mail Receiver" field type in the email address of the account that you want to receive the email notifications at. (It can either be the same email address as the sender or a different email address.) Then select the + button to add it to the list.

3. Select the "Save" button at the bottom to save your changes. You should see "Save Succeeded" if the changes were successfully saved.

4. Select the "Test" button to send a test email.
If all the settings were entered correctly it should say "Succeed".

5. Open the receiver email account to verify that you received the test email.

6. If the test was successful you can enable email notifications in any alarm event.
Navigate to the alarm event settings and check the boxes for "Enable" and "Send Email", then select "Save".

7. Whenever an alarm event is triggered you will get an email notification.