Difference between revisions of "NVR/Recording Setup/Zero Channel"

Revision as of 16:27, 6 January 2016

How to setup Zero Channel on Dahua NVR

Step 1: Please log into the DVR/NVR interface.

Step 2: Navigate to the System Menu

Step 3: Then go to the "Display" option

Step 4: Please look at the tabs at the top of the page and select "Zero Channel"

Step 5: You will be presented with some options to configure certain aspects of the

Zero Channel stream such as Compression, Resolution, Frame Rate & Bit Rate

Please see the video below on Zero Channel configuration:

How to setup Zero Channel on Dahua Web Service

Step 1: Setup Tab → System → Display.

Step 2: Zero-Channel → Check "Enable".

Revision as of 16:26, 6 January 2016 (view source) Mark (talk \| contribs) (→‎Setup Zero Channel) ← Older edit		Revision as of 16:27, 6 January 2016 (view source) Mark (talk \| contribs) (→‎Setup Zero Channel) Newer edit →
Line 31:		Line 31:


−	Step 1: Setup Tab → System ~~-->~~ Display.	+	Step 1: Setup Tab → System → Display.


−	Step 2: Zero-Channel ~~-->~~ Check "Enable".	+	Step 2: Zero-Channel → Check "Enable".