Difference between revisions of "NVR/Recording Setup/Zero Channel"

Revision as of 18:45, 6 January 2016

How to setup Zero Channel on Dahua NVR

Step 1: Please log into the DVR/NVR interface.

Step 2: Navigate to the System Menu

Step 3: Then go to the "Display" option

Step 4: Please look at the tabs at the top of the page and select "Zero Channel"

Step 5: You will be presented with some options to configure certain aspects of the

Zero Channel stream such as Compression, Resolution, Frame Rate & Bit Rate

Please see the video below on Zero Channel configuration:

How to setup Zero Channel on Dahua Web Service

Step 1: Setup Tab → System → Display.

Step 2: Zero-Channel → Check "Enable" → Click "Save".

Revision as of 18:44, 6 January 2016 (view source) Mark (talk \| contribs) (→‎Setup Zero Channel) ← Older edit		Revision as of 18:45, 6 January 2016 (view source) Mark (talk \| contribs) (→‎Setup Zero Channel) Newer edit →
Line 36:		Line 36:

	'''Step 2:''' Zero-Channel → Check "Enable" → Click "Save".		'''Step 2:''' Zero-Channel → Check "Enable" → Click "Save".
		+	[[file:zero_channel_2.png\|1000px]]