Difference between revisions of "NoVideoSnap"
Mark Navarro (talk | contribs) (→The device failed to record video and snapshot.) |
(→The device failed to record video and snapshot.) |
||
Line 2: | Line 2: | ||
Possible reason: “Snapshot time period” is set wrongly; storage path is not correct; “video mode” is set as off. | Possible reason: “Snapshot time period” is set wrongly; storage path is not correct; “video mode” is set as off. | ||
− | # Set “video time period”, “snapshot time period” in the WEB interface; please refer to the for more details. | + | # Set “video time period”, “snapshot time period” in the WEB interface; please refer to the manual for more details. |
# Check if the “memory point” enable in the WEB interface is checked. | # Check if the “memory point” enable in the WEB interface is checked. | ||
# Check if the connection of SD and FTP of video and snapshot storage is normal, try to connect FTP to the computer. | # Check if the connection of SD and FTP of video and snapshot storage is normal, try to connect FTP to the computer. | ||
# Set “video mode” as manual or auto in the WEB interface. | # Set “video mode” as manual or auto in the WEB interface. | ||
# From the WEB interface , make sure snapshot is set to "trigger". Under setup > image > encode > Snapshot > timing > select trigger. This should work for IVS (if available), face detect and motion detection if the snapshot box is checked off or selected from those '''event''' features. | # From the WEB interface , make sure snapshot is set to "trigger". Under setup > image > encode > Snapshot > timing > select trigger. This should work for IVS (if available), face detect and motion detection if the snapshot box is checked off or selected from those '''event''' features. |
Revision as of 17:43, 7 January 2016
The device failed to record video and snapshot.
Possible reason: “Snapshot time period” is set wrongly; storage path is not correct; “video mode” is set as off.
- Set “video time period”, “snapshot time period” in the WEB interface; please refer to the manual for more details.
- Check if the “memory point” enable in the WEB interface is checked.
- Check if the connection of SD and FTP of video and snapshot storage is normal, try to connect FTP to the computer.
- Set “video mode” as manual or auto in the WEB interface.
- From the WEB interface , make sure snapshot is set to "trigger". Under setup > image > encode > Snapshot > timing > select trigger. This should work for IVS (if available), face detect and motion detection if the snapshot box is checked off or selected from those event features.