Difference between revisions of "Template:RS485 SmartPSS"

Revision as of 20:08, 24 January 2020

1. From the Menu of SmartPSs

Click Device CFG

2. Click to select the recorder from the Device Tree on the left side of the screen

3. Click to expand the System section

4. Click PTZ

5. Use the dropdown to select the Channel

6. Use the dropdown box next to PTZ Type to select Local

7. Enter the desired settings for the RS485 communication

8. Click Save to save settings

@@ Line 6: / Line 6: @@
 <embedvideo service="youtube">https://youtu.be/Elsxllzuk9c</embedvideo>
 ==Step by Step Instructions==
+. From the Menu of SmartPSs
+Click Device CFG
+[[File:RS485_-_SmartPSS_-_1.jpg|600px]]
+. Click to select the recorder from the Device Tree on the left side of the screen
+[[File:RS485_-_SmartPSS_-_2.jpg|600px]]
+. Click to expand the System section
+[[File:RS485_-_SmartPSS_-_3.jpg|600px]]
+. Click PTZ
+[[File:RS485_-_SmartPSS_-_4.jpg|600px]]
+. Use the dropdown to select the Channel
+[[File:RS485_-_SmartPSS_-_5.jpg|600px]]
+. Use the dropdown box next to PTZ Type to select Local
+[[File:RS485_-_SmartPSS_-_6.jpg|600px]]
+. Enter the desired settings for the RS485 communication
+* Protocol
+* Address
+* Baud Rate
+* Data Bit
+* Stop Bit
+* Parity
+[[File:RS485_-_SmartPSS_-_7.jpg|600px]]
+. Click Save to save settings
+[[File:RS485_-_SmartPSS_-_8.jpg|600px]]