Difference between revisions of "USA/IPCamera/PTZ/Pro/40212TNI"

(Hardware Reset Instructions)
Line 35: Line 35:
 
[[Category:Model Specific Pages]]
 
[[Category:Model Specific Pages]]
 
[[Category:HD-CVI]]
 
[[Category:HD-CVI]]
 
 
===Hardware Reset Instructions===
 
 
In order to access the hardware reset button on the camera you must remove the outer casing and shell.
 
 
Remove the 2 anchoring screws , 1 is circled in the below image the other screw will located on the opposite side (not pictured)
 
 
[[File:40212TNI_HW_reset_1.jpg|600px]]
 
 
 
Screw removed:
 
 
[[File:40212TNI_HW_reset_2.jpg|600px]]
 
 
You can now remove the outer black shell protecting the camera's internals:
 
 
[[File:40212TNI_HW_reset_3.JPG|600px]]
 
 
 
[[File:40212TNI_HW_reset_4.jpg|600px]]
 
 
Press and hold the reset button for 30 seconds with the camera powered on.
 
 
After 30 seconds the camera should reset, if it does not work try the reset procedure a second time.
 

Revision as of 16:18, 6 March 2020

40212TNI

50230UNI.png

QSGDownloadBanner.jpg

float

Features

  • 1/2.8-in. 2 MP STARVIS™ CMOS Sensor
  • Starlight Technology for Ultra-low Light Sensitivity
  • 12x Optical Zoom
  • Triple-stream Encoding
  • H.265 and H.264 Dual Codecs
  • 1080p at 30 fps Maximum Resolution
  • Intelligent Video System (IVS)
  • ArcticPro Series Camera - Operational down to –40° C (–40° F)
  • IP66 Ingress Protection and IK10 Vandal Resistance
  • PoE+ Support
  • Five-year Warranty (for products sold through authorized Dahua Dealers)

Firmware

Firmware Update Instructions

Firmware Update Download

Specifications