Difference between revisions of "Access Control/How to Add Access Controller to SmartPSSAC"
| Line 7: | Line 7: | ||
==Pre-requisites== | ==Pre-requisites== | ||
Having an initialized Access Controller on the local network ready to go. Please Follow these instructions if not already done so: <br> | Having an initialized Access Controller on the local network ready to go. Please Follow these instructions if not already done so: <br> | ||
| + | *[[Access_Control/How_to_Initialize_DHI_ASC2204C-S_with_Configtool|How to initialize DHI-ASC2204C-S with Configtool]] | ||
*[[Access_Control/How_to_Change_IP_Address_to_DHI-ASC2204C-S|How to change IP Address to DHI-ASC2204C-S]] | *[[Access_Control/How_to_Change_IP_Address_to_DHI-ASC2204C-S|How to change IP Address to DHI-ASC2204C-S]] | ||
| − | |||
*[[Access_Control/How_to_Change_Time_and_Date_DH-ASC2204C-S|How to change the time and date of DH-ASC2204C-S]] | *[[Access_Control/How_to_Change_Time_and_Date_DH-ASC2204C-S|How to change the time and date of DH-ASC2204C-S]] | ||
==Step by Step Instructions== | ==Step by Step Instructions== | ||
1. | 1. | ||
Revision as of 17:01, 3 December 2021
Description
This article will show the steps on how to add an Access Controller to SMARTPSS-AC and change the Door Names easily identify the doors as we go through the configurations.
Important
- Access Controller must be on latest firmware or it may continuously go offline. Please check the firmware version of your controller before continuing through the instructions.
Pre-requisites
Having an initialized Access Controller on the local network ready to go. Please Follow these instructions if not already done so:
- How to initialize DHI-ASC2204C-S with Configtool
- How to change IP Address to DHI-ASC2204C-S
- How to change the time and date of DH-ASC2204C-S
Step by Step Instructions
1.
