Difference between revisions of "Troubleshoot/NVR/Troubleshoot Date and Time"
m |
|||
| Line 9: | Line 9: | ||
[[file:DateandTimeTroubleshoot1.png]] | [[file:DateandTimeTroubleshoot1.png]] | ||
| + | |||
| + | GMT stands for Greenwich Mean Time. | ||
| + | |||
| + | *Eastern Standard Time: GMT - 05:00 | ||
| + | |||
| + | *Central Standard Time: GMT - 06:00 | ||
| + | |||
| + | *Mountain Standard Time: GMT - 07:00 | ||
| + | |||
| + | *Pacific Standard Time: GMT - 08:00 | ||
| + | |||
| + | *Alaskan Standard Time: GMT - 09:00 | ||
| + | |||
| + | *Hawaii-Aleutian Standard Time: GMT - 10:00 | ||
2. Setup DST, if applicable. | 2. Setup DST, if applicable. | ||
Revision as of 16:48, 15 March 2016
How to set the date and time
Time display is not correct.
There are following possibilities:
- Setup is not correct
- Battery contact is not correct or voltage is too low.
- Crystal is broken.
1. Make sure the "Time Zone" is set correctly.
GMT stands for Greenwich Mean Time.
- Eastern Standard Time: GMT - 05:00
- Central Standard Time: GMT - 06:00
- Mountain Standard Time: GMT - 07:00
- Pacific Standard Time: GMT - 08:00
- Alaskan Standard Time: GMT - 09:00
- Hawaii-Aleutian Standard Time: GMT - 10:00
2. Setup DST, if applicable.
- Daylight Savings Time begins the 2nd week of March
- Daylight Savings Time ends the 1st week of November.
3. "Sync PC" if all else fails.
4. Click, "OK" to save your changes.
