Difference between revisions of "Troubleshoot/NVR/Troubleshoot Date and Time"
m (JP moved page DateTime to Troubleshoot/NVR/Troubleshoot Date and Time) |
|||
| Line 1: | Line 1: | ||
How to set the date and time | How to set the date and time | ||
| + | |||
===Time display is not correct.=== | ===Time display is not correct.=== | ||
There are following possibilities: | There are following possibilities: | ||
| − | |||
| − | |||
| − | |||
| − | 1. Make sure the "Time Zone" is set correctly. | + | * Setup is not correct |
| + | * Battery contact is not correct or voltage is too low. | ||
| + | * Crystal is broken. | ||
| + | |||
| + | 1. Make sure the "Time Zone" is set correctly. | ||
| − | [[file:DateandTimeTroubleshoot1.png]] | + | [[file:DateandTimeTroubleshoot1.png|550px]] |
GMT stands for Greenwich Mean Time. | GMT stands for Greenwich Mean Time. | ||
| − | *Eastern Standard Time: | + | * Eastern Standard Time: GMT - 05:00 |
| − | *Central Standard Time: | + | * Central Standard Time: GMT - 06:00 |
| − | *Mountain Standard Time: | + | * Mountain Standard Time: GMT - 07:00 |
| − | *Pacific Standard Time: | + | * Pacific Standard Time: GMT - 08:00 |
| − | *Alaskan Standard Time: | + | * Alaskan Standard Time: GMT - 09:00 |
| − | *Hawaii-Aleutian Standard Time: | + | * Hawaii-Aleutian Standard Time: GMT - 10:00 |
| − | 2. Setup DST, if applicable. | + | 2. Setup DST, if applicable. |
| − | *Daylight Savings Time begins the 2nd week of March | + | * Daylight Savings Time begins the 2nd week of March |
| − | *Daylight Savings Time ends the 1st week of November. | + | * Daylight Savings Time ends the 1st week of November. |
| − | [[file:DateandTimeTroubleshoot2.png]] | + | [[file:DateandTimeTroubleshoot2.png|550px]] |
| − | 3. "Sync PC" if all else fails. | + | 3. "Sync PC" if all else fails. |
| − | [[file:DateandTimeTroubleshoot3.png]] | + | [[file:DateandTimeTroubleshoot3.png|550px]] |
| − | 4. Click, "OK" to save your changes. | + | 4. Click, "OK" to save your changes. |
| − | [[file:DateandTimeTroubleshoot4.png]] | + | [[file:DateandTimeTroubleshoot4.png|550px]] |
[[Category:Record Setup]] | [[Category:Record Setup]] | ||
[[Category:Troubleshoot]] | [[Category:Troubleshoot]] | ||
Revision as of 22:58, 18 April 2016
How to set the date and time
Time display is not correct.
There are following possibilities:
- Setup is not correct
- Battery contact is not correct or voltage is too low.
- Crystal is broken.
1. Make sure the "Time Zone" is set correctly.
GMT stands for Greenwich Mean Time.
- Eastern Standard Time: GMT - 05:00
- Central Standard Time: GMT - 06:00
- Mountain Standard Time: GMT - 07:00
- Pacific Standard Time: GMT - 08:00
- Alaskan Standard Time: GMT - 09:00
- Hawaii-Aleutian Standard Time: GMT - 10:00
2. Setup DST, if applicable.
- Daylight Savings Time begins the 2nd week of March
- Daylight Savings Time ends the 1st week of November.
3. "Sync PC" if all else fails.
4. Click, "OK" to save your changes.
