DVR/Change to HDCVI Analog and IP

Revision as of 22:09, 1 September 2017 by Anna (talk | contribs) (Description)

How to Change Between HDCVI, Analog, and IP

Description

Follow these step-by-step instructions to change a HDCVI, analog, or IP channel on an HDCVI recorder (HCVR or XVR).

Prerequisites

  • HCVR
  • HDCVI, Analog, or IP cameras (optional)

Video Instructions

Step by Step Instructions for HCVR

1. From the Main Menu Select Camera.

Cameratype2.png


2. Select Channel Type

Cameratype4.png


3. Check off which channels are to be Coaxial, UTP and IP. Note: You can make one any of the channels IP ➞ Select Apply and Save.

Cameratype3.png


Device will reboot once changes are saved.

Cameratype5.png

Step by Step Instructions for XVR

1. From the Main Menu Select Camera.

Change to HDCVI Analog and IP1.png

2. Select Channel Type

Change to HDCVI Analog and IP2.png

3. If you are trying to activate this XVR's additional IP channels then select "Add IP CAM", this will require a reboot.

Change to HDCVI Analog and IP3.png

4. If you need to designate a Coaxial channel for IP in addition to bonus channels then you can occupy those channels with IP in a reverse sequential order. If you need to force a Coaxial channel for CVI AHD CVBS or other, this would be the place, although this process should be automatic.

Change to HDCVI Analog and IP4.png