SmartPSS/How To Setup Event Alarm Link

Revision as of 17:16, 28 March 2019 by Marques.Phillips (talk | contribs) (How To Setup Event Alarm Link In SmartPSS)

How To Setup Event Alarm Link In SmartPSS

Description

This article will show you how to setup the Event Alarm Link feature in SmartPSS 2.0

Prerequisites

Video Instructions

Coming Soon

Step by Step Instructions

1. Launch SmartPSS.

Preset SmartPSS 1.jpg


2. Click 'Event Config'

How To Setup Event Alarm Link -1.jpg


3. The Event Config menu will appear.


How To Setup Event Alarm Link -2.jpg


4. Click to select the device you wish to configure from the Device Tree on the left

How To Setup Event Alarm Link -3.jpg


5. Select the Event Type for this camera

How To Setup Event Alarm Link -4.jpg


6. Use the tabs on the right to set up the parameters for when the Event is triggered.


How To Setup Event Alarm Link -5.jpg


Notify

Alarm Sound:

EMap Twinkle:

Send Mail


How To Setup Event Alarm Link -6.jpg

=

Link Video

=

- When event occurs it can link to a camera preview or record.

How To Setup Event Alarm Link -7.jpg

Use the device tree to select the device. Select from the pre-configured layouts or create your own

Alarm Output
Defence Time