DMSS/Add Dahua Device via IP

Add Dahua Device via IP

Description

This tutorial is demonstrating how to add recorders/cameras via local/external IP addresses.

Prerequisites

• DMSS installed on the phone
• Recorder/Cameras already initialized

Step by Step Instructions

1. Get the local IP of the recorder on the webui or HDMI monitor. Please note that if an external IP address needed to be used, this will need to be grabbed on the router's webui or it can be grabbed via https://www.canyouseeme.org/ or https://www.yougetsignal.com/tools/open-ports/ and it must be port forwarded.

Error creating thumbnail: Unable to save thumbnail to destination

2. Take note of the TCP port.

Error creating thumbnail: Unable to save thumbnail to destination

3. Open the DMSS app on the phone and tap the + sign located on the top right corner then select IP/Domain.

Error creating thumbnail: Unable to save thumbnail to destination

4. Select NVR if the added device is recorder.

Error creating thumbnail: Unable to save thumbnail to destination

5. Input all the information and tap the Save button.

Error creating thumbnail: Unable to save thumbnail to destination

6. The live view of the cameras will displayed after it's successfully connected.

Error creating thumbnail: Unable to save thumbnail to destination