VideoLossCam
Revision as of 21:29, 1 September 2016 by Mark (talk | contribs) (→After I connected to the IP channel, there one*window output is OK, but there is no multiple*window output.)
After I connected to the IP channel, there one*window output is OK, but there is no multiple*window output.
There are following possibilities:
- Lower, FPS, Bitrate, change CBR to VBR and set to sub-stream on some of the cameras.
- Check the sub stream of the camera has been enabled or not.
- Check the sub stream type of the camera is H.264 or not.
- Check the device supports camera sub stream resolution or not (such as 960H, D1,CIF,etc.)
