Notice: Firmware Links Under Maintenance We are currently undergoing maintenance on all firmware links. If any links are inaccessible, please email or contact Tech Support for the firmware. We appreciate your patience during the maintenance, thank you for your understanding.
PTZ/SmartPSS 2.0/Pan
Revision as of 22:54, 25 May 2017 by JP (talk | contribs) (Created page with "==How to Setup Pan in SmartPSS 2.0== ===Description=== The Tour feature allows you to set a up multiple locations for the PTZ to cycle through using already established Pre-Se...")
Contents
How to Setup Pan in SmartPSS 2.0
Description
The Tour feature allows you to set a up multiple locations for the PTZ to cycle through using already established Pre-Sets.
Prerequisites
- Dahua Network PTZ
- IP Address of Network PTZ
- SmartPSS 2.0
- PTZ added to SmartPSS Device List
Video Instructions
Step by Step Instructions
1. Launch SmartPSS.
2. Click, "Liveview"
3. Double click the PTZ on the device list on the left, and double click the video feed to bring the PTZ up full screen.
4. Click, "PTZ"
5. Click, "More Functions" in the lower left.