Notice: Firmware Links Under Maintenance We are currently undergoing maintenance on all firmware links. If any links are inaccessible, please email or contact Tech Support for the firmware. We appreciate your patience during the maintenance, thank you for your understanding.

Video Intercom/SIP 2.0/How To Add VTO4202 To VTH Via Configtool

Revision as of 18:32, 4 May 2021 by William.V (talk | contribs)

How to add DHI-VTO4202F to VTH via Configtool

Description

This article will go over the setup DHI-VTO4202F with Dahua Indoor Monitor by using Configtool software.

Please be sure to have followed our How to Initialize Video Intercom using Configtool Guide ---> Here

Pre-requisites

Video Instructions

Step by Step Instructions

1.

How to Setup 2Wire IP Modular Station to VTH using ConfigTool-1.png

2.

How to Setup 2Wire IP Modular Station to VTH using ConfigTool-2.png

3.

How to Setup 2Wire IP Modular Station to VTH using ConfigTool-3.png

4.

How to Setup 2Wire IP Modular Station to VTH using ConfigTool-4.png

5.

How to Setup 2Wire IP Modular Station to VTH using ConfigTool-5.png

6.

How to Setup 2Wire IP Modular Station to VTH using ConfigTool-6.png

7.

How to Setup 2Wire IP Modular Station to VTH using ConfigTool-7.png

8.

How to Setup 2Wire IP Modular Station to VTH using ConfigTool-8.png

9.

How to Setup 2Wire IP Modular Station to VTH using ConfigTool-9.png

10.

How to Setup 2Wire IP Modular Station to VTH using ConfigTool-10.png

Retrieved from "https://DahuaWiki.com/index.php?title=Video_Intercom/SIP_2.0/How_To_Add_VTO4202_To_VTH_Via_Configtool&oldid=72930"